ISL6398 Datasheet, PDF (56/57 Pages) Intersil Corporation – Programmable soft-start rate and DVID rate

ISL6398
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to web to make sure you
have the latest revision.
DATE
August 13, 2015
REVISION
FN8575.1
CHANGE
Updated “SMBus/PMBus/I²C” section of Electrical Specification table on page 13.
-Added PMBus specs Signal Input Low Voltage, Signal Input High Voltage and Signal Output Low Voltage.
-Added min/max Time-out spec
-Changed the Time-out typical from “35” to “30”.
Updated the second sentence under “Soft-start” on page 25.
Updated Table 9 on page 33 by splitting PMBus (DC) and PMBus (DD) (now Table 10) into two different tables,
also updated R_DW value
Updated third paragraph
for 80h from “10” to “499”.
under “SMBus, PMBus and
I²C
Operation”
on
page
35.
Updated Figure 33 on page 35.
Updated Figure 35 on page 36.
Updated Figure 36 on page 37.
Updated DFh[8:0] description in Table 14 on page 41 and changed bit from “[7:0]” to “[8:0]”.
Updated POD to current revision. Changes from revision 1 to revision 2 are as follows:
Added tolerance ± values.
April 18, 2014
FN8575.0 Initial Release
About Intersil
Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The company's products
address some of the largest markets within the industrial and infrastructure, mobile computing and high-end consumer markets.
For the most updated datasheet, application notes, related documentation and related parts, please see the respective product
information page found at www.intersil.com.
You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask.
Reliability reports are also available from our website at www.intersil.com/support
For additional products, see www.intersil.com/en/products.html
Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted
in the quality certifications found at www.intersil.com/en/support/qualandreliability.html
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time
without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be
accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
Submit Document Feedback 56
FN8575.1
August 13, 2015