D2-926XX Datasheet, PDF (5/37 Pages) Intersil Corporation – Integrated DSP Digital Sound Processing

D2-926xx
Absolute Maximum Ratings (Note 10)
Supply Voltage
RVDD, PWMVDD, ADCVDD . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to 4.0V
CVDD, PLLVDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to 2.4V
Input Voltage
Any Input but XTALI . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to RVDD +0.3V
XTALI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to PLLVDD +0.3V
Input Current, Any Pin but Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . ±10mA
ESD Rating
Human Body Model (Tested per JESD22-A114F) . . . . . . . . . . . . . . 2000V
Machine Model (Tested per JESD22-A115C) . . . . . . . . . . . . . . . . . 200V
Charged Device Model (Tested per JESD22-C101E). . . . . . . . . . . . . 750V
Latch-Up
(Pins 2, 4, 6, 7, 8, 9, 37 (72 Ld Package only) Tested per JESD78D
Class II, Level B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50mA
(All Other pins Tested per JESD78D Class II, Level A) . . . . . . . . . 100mA
Thermal Information
Thermal Resistance (Typical)
_JA (°C/W) _JC (°C/W)
128 Ld LQFP Package (Notes 6, 8) . . . . . .
39
6.5
72 Ld QFN Package (Notes 7, 9) . . . . . . . .
22
0.80
Maximum Storage Temperature. . . . . . . . . . . . . . . . . . . . -55°C to +150°C
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see TB493
Recommended Operating Conditions
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -10°C to +85°C
Digital I/O Supply Voltage, PWMVDD . . . . . . . . . . . . . . . . . . . . . . . . . . .3.3V
Core Supply Voltage, CVDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.8V
Analog Supply Voltage, PLLVDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.8V
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTES:
6. _JA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
7. _JA is measured with the component mounted on a high effective thermal conductivity test board with direct attach of exposed pad to PCB.
8. For _JC, the “case temp” location is taken at the package top center.
9. For _JC, the “case temp” is measured on bottom of exposed pad.
10. Absolute Maximum parameters are not tested in production.
Electrical Specifications T_A = +25°C, CVDD = PLLVDD = 1.8V ±5%, RVDD = PWMVDD = 3.3V ±10%. All grounds at 0.0V. All voltages
referenced to ground. PLL at 294.912MHz, OSC at 24.576MHz, core running at 147.456MHz with typical audio data traffic. Minimum supply currents are
measured in full power down configuration.
SYMBOL
PARAMETER
TEST
MIN
MAX
CONDITIONS
(Note 14)
TYP
(Note 14) UNIT
V_IH Digital Input High Logic Level (Note 11)
Relative to RVDD
2.0
-
V_IL Digital Input Low Logic Level (Note 11)
Relative to RVDD
-
-
V_OH High Level Output Drive Voltage
I_OUT at - Pin Drive Strength Current. See “Pin Description, DAE-3 (128-
Pin)” on page 12, and “Pin Description DAE-3HT (72-Pin)” on page 17
RVDD - 0.4
-
-
V
0.8
V
-
V
V_OL Low Level Output Drive Voltage
I_OUT at + Pin Drive Strength Current. See “Pin Description, DAE-3 (128-
Pin)” on page 12, and “Pin Description DAE-3HT (72-Pin)” on page 17
-
-
0.4
V
VIHX High Level Input Drive Voltage XTALI Pin
0.7
-
PLLVDD
V
VILX Low Level Input Drive Voltage XTALI Pin
-
-
0.3
V
I_IN
C_IN
VOHO
Input Leakage Current (Note 12)
Input Capacitance
High Level Output Drive Voltage OSCOUT Pin
-
-
-
9
PLLVDD - 0.3
-
±10
µA
-
pF
-
V
VOLO Low Level Output Drive Voltage OSCOUT Pin
-
-
0.3
V
C_OUT
t_RST
R_VDD
Output Capacitance
nRESET Pulse Width
Typical Digital I/O Pad Ring Supply
(Voltage)
(Current, Active)
-
9
-
pF
-
10
-
ns
3.0
3.3
3.6
V
-
10
-
mA
(Current, Power-Down)
-
<1
-
mA
PWM_VDD Typical PWM I/O Pad Ring Supply
(Voltage)
(Current, Active)
3.0
3.3
3.6
V
-
5
-
mA
(Current, Power-Down)
-
<1
-
mA
Submit Document Feedback
5
FN6787.3
May 17, 2016