D2-926XX Datasheet, PDF (34/37 Pages) Intersil Corporation – Integrated DSP Digital Sound Processing

D2-926xx
Revision History The revision history provided is for informational purposes only and is believed to be accurate, but not warranted.
Please go to web to make sure you have the latest Rev.
DATE
REVISION
CHANGE
May 17, 2016
FN6787.3
Updated entire datasheet applying Intersil’s new standards.
Updated the Ordering Information table on page 2.
Added Note 2.
Replaced Products verbiage with About Intersil verbiage.
Added Dolby and DTS disclaimers.
July 3, 2012
FN6787.2
Complete datasheet rewrite to add DAE-3HT devices to the DAE-3 family.
- Revisions and additions to accommodate additions for DAE-3HT to DAE-3/DAE-3HT family.
- Complete rewrite of page 1 description and features, and complete rewrite of all functional description content.
(Rewrites do not change function of DAE-3 devices, but provide more accurate explanation of device use.)
- No changes to DAE-3 specifications other than: Addition and revision of ADC specifications and updates of
supporting detail for ADC. All other DAE-3 specifications unless noted by DAE-3HT specific designations are
identical to those of DAE-3.
- Updates to DAE-3 high-level and detail block diagrams, and addition of diagrams for DAE-3HT.
- Removal of ADC and DSD plots.
- Removal of all HDA interface, HDMI interface, DSD, and SCI references and descriptions.
- Removal of D2-92613-LR and D2-92625-LR part numbers which are being discontinued. (Their features are
fully supported in the D2-92633-LR part number and the removed part numbers are not needed.)
POD Q128.14x14 updated to latest revision - Changed title from “Thin Plastic Quad Flatpack Package (LQFP)”
to “Low Plastic Quad Flatpack Package (LQFP)”
POD L72.10x10F updated to latest revision - Changed bottom view to reflect correct pin 1 corner and pin
numbering. Also cleaned up details Y and Z
May 3, 2011
FN6787.1
Rewrite of datasheet. Fixes to incorrect (pin 109) connection description, removal of unnecessary descriptive
content and structure.
-Updated datasheet to latest corporate document format and applied standards as follows:
Ordering information added audio processing column, added device support note, numbered notes, lead finish
matching intrepid.
Added Tjc to Thermal Information and corresponding note on page 5
Added Compliance note on page 6 referencing MIN and MAX columns of Electrical Spec Tables
-Updated Block Diagram on page 1 - complete re-draw.
-Removed D2-92643 part number from DAE-3 Device Feature Set Offering Table 1 on page 2 (this is not an
available ordering part number)
-Corrected pin 109 (nTRST) description error on page 14 to indicate that it must be pulled high at all times.
(internally-requested error correction). Changed from: "Hardware test mode control. For D2Audio use only. Must
be tied high or low." To: "Factory test only. Must be tied high at all times."
-Removed outdated high level system diagrams,
-Removed all (outdated and non-applicable) reference design examples,
-Removed unnecessary HDA connection diagrams
-Removed trademarks section/paragraph. Explicit listing not required/sufficiently covered through other
means.
April 1, 2010
FN6787.0 Initial Release
About Intersil
Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The company's products
address some of the largest markets within the industrial and infrastructure, mobile computing and high-end consumer markets.
For the most updated datasheet, application notes, related documentation and related parts, please see the respective product
information page found at www.intersil.com.
You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask.
Reliability reports are also available from our website at www.intersil.com/support.
Submit Document Feedback ₃₄
FN6787.3
May 17, 2016