ISL5216_14 Datasheet, PDF (49/65 Pages) Intersil Corporation – Four-Channel Programmable Digital Downconverter

ISL5216
Absolute Maximum Ratings
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6V
Core Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5V
Input, Output or I/O Voltage . . . . . . . . . . . . GND -0.5V to V_CC +0.5V
ESD Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class I
Operating Conditions
Voltage Range (I/O) . . . . . . . . . . . . . . . . . . . . . . +3.135V to +3.465V
Voltage Range (core) . . . . . . . . . . . . . . . . . . . . .+2.375V to +2.625V
Temperature Range
Industrial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-40°C to +85°C
Input Low Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0V to +0.8V
Input High Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . .2V to I/O V_CC
Thermal Information
Thermal Resistance (Typical, Note 21))
θ_JA (°C/W)
196 Lead BGA Package (0.8 mm pitch). . . . . . . . . .
30
w/200 LFM Air Flow . . . . . . . . . . . . . . . . . . . . . . . . .
27
w/400 LFM Air Flow . . . . . . . . . . . . . . . . . . . . . . . . .
26
196 Lead BGA Package (1.0 mm pitch). . . . . . . . . .
29
w/200 LFM Air Flow . . . . . . . . . . . . . . . . . . . . . . . . .
26
w/400 LFM Air Flow . . . . . . . . . . . . . . . . . . . . . . . . .
25
Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +125°C
Maximum Storage Temperature Range . . . . . . . . . .-65°C to +150°C
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . +300°C
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied
NOTE:
21. θ_JA is measured with the component mounted on a high effective thermal conductivity test board in free air or with the airflow. See Tech Brief
TB379 for details.
Electrical Specifications V_CC1 = Core Supply: 2.5V ± 0.125V, V_CC2 = I/O Supply: 3.3 ± 0.165V , T_A = -40°C to +85°C, Industrial
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
TYP
MAX
UNITS
Logical One Input Voltage
V_IH
V_CC2 = 3.465V
2.0
-
-
V
Logical Zero Input Voltage
V_IL
V_CC2 = 3.135V
-
-
0.8
V
Output High Voltage
V_OH
I_OH = -2mA, V_CC2 = 3.135V
2.6
-
-
V
Output Low Voltage
V_OL
I_OL = 2mA, V_CC2 = 3.135V
-
-
0.4
V
Input Leakage Current
I_I
V_IN = V_CC2 or GND, V_CC2 = 3.465V
-10
-
10
μA
Output Leakage Current
I_O
V_IN = V_CC2 or GND, V_CC2 = 3.465V
-10
-
10
μA
Typical Leakage Current
I_O-TYP V_IN = V_CC2 or GND, V_CC2 = 3.465V
-
±2
-
μA
Standby Power Supply Current I_CCSB-CR V_CC1 = 2.625V, Outputs Not Loaded,
-
-
8
mA
-- Core
No CLK
Standby Power Supply Current I_CCSB-IO V_CC1 = 2.625V, Outputs Not Loaded,
-
-- IO’s
No CLK
-
0.5
mA
Operating Power Supply
Current -- Core
Operating Power Supply
Current -- IO’s
Operating Power Supply
Current -- Typical
Input Capacitance
Output Capacitance
I_CCOP-CR f = 80MHz, V_IN = V_CC1 or GND,
-
V_CC1 = 2.625V, C_L = 40pF
I_CCOP-IO f = 80MHz, V_IN = V_CC1 or GND,
-
V_CC1 = 2.625V, C_L = 40pF
I_CCOP-TYP f = 80MHz, V_IN = V_CC1 or GND,
-
V_CC1 = 2.625V, C_L = 40pF
C_IN
Freq = 1MHz, V_CC open, all
-
measurements are referenced to device
C_OUT
ground
-
-
700
mA
-
50
mA
570
-
mA
(Note 22)
-
5
pF
(Note 23)
-
5
pF
(Note 23)
NOTES:
22. Power Supply current is proportional to frequency of operation and programmed configuration of the part. Typical rating for I_CCOP is
7.125mA/MHz @ 80MHz, full utilization.
23. Capacitance: T_A = +25°C, controlled via design or process parameters and not directly tested. Characterized upon initial design and at major
process or design changes.
49
FN6013.3
July 13, 2007