ISL62883C Datasheet, PDF (43/43 Pages) Intersil Corporation – Multiphase PWM Regulator for IMVP-6.5™ Mobile CPUs and GPUs

ISL62883C
Package Outline Drawing
L40.5x5
40 LEAD THIN QUAD FLAT NO-LEAD PLASTIC PACKAGE
Rev 0, 4/07
6
PIN 1
INDEX AREA
5.00
A
B
4X 3.60
36X 0.40
6
PIN #1 INDEX AREA
(4X) 0.15
TOP VIEW
40X 0.4
±0 .1
BOTTOM VIEW
0.20
b
0.10 M C A B
PACKAGE OUTLINE
0.40
0.750
0.050
SEE DETAIL “X”
// 0.10 C
BASE PLANE ^C
SEATING PLANE
0.08 C
SIDE VIEW
TYPICAL RECOMMENDED LAND PATTERN
(36X 0..40)
(40X 0.20)
(40X 0.60)
0.2 REF
5
C
0.00 MIN
0.05 MAX
DETAIL "X"
NOTES:
1. Dimensions are in millimeters.
Dimensions in ( ) for Reference Only.
2. Dimensioning and tolerancing conform to AMSE Y14.5m-1994.
3. Unless otherwise specified, tolerance : Decimal ± 0.05
4. Dimension b applies to the metallized terminal and is measured
between 0.15mm and 0.27mm from the terminal tip.
5. Tiebar shown (if present) is a non-functional feature.
6. The configuration of the pin #1 identifier is optional, but must be
located within the zone indicated. The pin #1 indentifier may be
either a mold or mark feature.
43
FN7557.1
March 18, 2010