82C85 Datasheet, PDF (10/21 Pages) Intersil Corporation – CMOS Static Clock Controller/Generator

82C85
Absolute Maximum Ratings
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +8.0V
Input, Output or I/O Voltage . . . . . . . . . . . GND -0.5V to V_CC +0.5V
ESD Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 1
Operating Conditions
Operating Voltage Range . . . . . . . . . . . . . . . . . . . . . +4.5V to +5.5V
Operating Temperature Range
C82C85. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0^oC to +70^oC
I82C85 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40^oC to +85^oC
M82C85 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55^oC to +125^oC
Thermal Information
Thermal Resistance (Typical)
θ_JA (^oC/W) θ_JC (^oC/W)
CERDIP Package . . . . . . . . . . . . . . . . . 70
16
CCC Package . . . . . . . . . . . . . . . . . . . . 75
18
PLCC Package . . . . . . . . . . . . . . . . . . . 65
N/A
Storage Temperature Range . . . . . . . . . . . . . . . . .-65^oC to +150^oC
Maximum Junction Temperature Ceramic Package . . . . . . . +175^oC
Maximum Junction Temperature Plastic Package . . . . . . . . +150^oC
(Soldering 10s)
Maximum Lead Temperature (Soldering 10s). . . . . . . . . . . . +300^oC
(PLCC - Lead Tips Only)
Die Characteristics
Gate Count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 Gates
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation
of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
DC Electrical Specifications V_CC = 5.0V 10%; T_A = 0^oC to +70^oC (C82C85);
T_A = -40^oC to +85^oC (I82C85);
T_A = -55^oC to +125^oC (M82C85)
SYMBOL
PARAMETER
MIN
MAX
UNITS
V_IH
Logical One Input Voltage
2.0
-
V
2.2
V
V_IHR
Reset Input High Voltage
2.8
-
V
V_IL
Logical Zero Input Voltage
-
0.8
V
V_T+ - V_T
Reset Input Hysteresis
0.25
-
V
V_OH
Logical One Output Voltage
V_CC-0.4
-
V
V_OL
Logical Zero Output Voltage
-
II
Input Leakage Current
-1.0
IBHH
Bus-hold High Leakage Current
-10
ICCSB
Standby Power Supply Current
-
ICCOP
Operating Power Supply Current
-
-
ICCSLOW Slow Mode Operating Current
-
-
NOTE:
1. For CSYNC, V_IL = GND
0.4
V
1.0
µA
-200
µA
100
µA
50
mA
70
mA
40
mA Crystal
Freq = 15MHz
60
mA Crystal
Freq = 25MHz
TEST CONDITIONS
C82C85, I82C85
M82C85
Note 1
I_OH = -5.0 mA (CLK, CLK50)
I_OH = -1.0mA (X2)
I_OH = -2.5mA (all other outputs)
I_OL = +2.5mA (X2)
I_OL = +5.0mA (all other outputs)
V_IN = V_CC or GND, except DIP
Pins 11 - 15, 21, 23
V_IN = 3.0V; Pins 11 - 15, 21
82C85 in HALT state with oscillator
stopped
Crystal Frequency = 15MHz, outputs
open, inputs = GND or V_CC
Crystal Frequency = 25MHz, outputs
open, inputs = GND or V_CC
Outputs Open; SLO/FST = GND,
START = V_CC, Other inputs - V_IN =
V_CC or GND
Capacitance T_A = 25^oC
SYMBOL
PARAMETER
C_IN
C_OUT
Input Capacitance
Output Capacitance
TYPICAL
15
20
UNITS
pF
pF
TEST CONDITIONS
FREQ = 1MHz, all measurements are referenced to device
GND
306