82540EP Datasheet, PDF (35/46 Pages) Intel Corporation – 82540EP Gigabit Ethernet Controller

Networking Silicon — 82540EP
5.3
Thermal Specifications
The 82540EP device is specified for operation when the ambient temperature (TA) is within the
range of -40^° C to 85^° C.
TC (case temperature) is calculated using the equation:
TC = TA + P (JA - q JC)
TJ (junction temperature) is calculated using the equation:
TJ = TA + PJA
P (power consumption) is calculated by using the typical ICC, as indicated in Table 4 of Section
4.0, and nominal VCC. The thermal resistances are shown in Table 18.
Table 18. Thermal Characteristics
Symbol
Parameter
JA
Thermal resistance, junction-to-ambient
JC
Thermal resistance, junction-to-case
Value at specified airflow (m/s)
0
1
2
3
28.1
25.0
23.7
22.8
6.1
6.1
6.1
6.1
Units
°C/
Watt
°C/
Watt
Thermal resistances are determined empirically with test devices mounted on standard thermal test
boards. Real system designs may have different characteristics due to board thickness, arrangement
of ground planes, and proximity of other components. The case temperature measurements should
be used to assure that the 82540EP device is operating under recommended conditions.
29