GDPXA255A0E400 Datasheet, PDF (26/40 Pages) Intel Corporation – Electrical, Mechanical, and Thermal Specification

Electrical Specifications
Table 9. Voltage, Temperature, and Frequency Electrical Specifications (Sheet 2 of 2)
Symbol
Description
Min
Typical
Max
Units
Peak Voltage Range
VVCC_P VCC, PLL_VCC Voltage, Peak Range
fTURBO_P Turbo Mode Frequency, Peak Range
fSDRAM_P ^{External Synchronous Memory}
Frequency, Peak Range
1.235
99.5
50
1.30
1.65
398.2
99.5
V
MHz
MHz
4.4
Targeted DC Specifications
The DC characteristics for each pin include input-sense levels and output-drive levels and currents.
These parameters can be used to determine maximum DC loading, and also to determine maximum
transition times for a given load. Table 10, “Standard Input, Output, and I/O Pin DC Operating
Conditions” shows the DC operating conditions for the high- and low-strength input, output, and
I/O pins. All DC specification values are valid for the entire temperature range of the device.
Table 10. Standard Input, Output, and I/O Pin DC Operating Conditions
Symbol
Description
Min
Input DC Operating Conditions
Input High Voltage, all standard input and
VIH
I/O pins
0.8*VCCQ
Input Low Voltage, all standard input and
VIL
I/O pins
VSS
IIN
Input Leakage, all standard input and IO
pins
Output DC Operating Conditions
VOH
Output High Voltage, all standard output
and I/O pins
VCCQ-0.1
VOL
Output Low Voltage, all standard output
and I/O pins
VSS
IOH_H
Output High Current, all standard, high-
strength output and I/O pins (VO=VOH)
-10
Output High Current, all standard, low-
IOH_L
strength output and I/O pins (VO=VOH)
-3
Output Low Current, all standard, high-
IOL_H
strength output and I/O pins (VO=VOH)
10
IOL_L
Output Low Current, all standard, low-
3
strength output and I/O pins (VO=VOH)
Typical
Max
Units
VCCQ
V
0.2*VCCQ V
10
µA
VCCQ
V
VSS+0.4
V
mA
mA
mA
mA
26
Intel® PXA255 Processor Electrical, Mechanical, and Thermal Specification