TLE9877QXA20_15 Datasheet, PDF (97/122 Pages) Infineon Technologies AG – Microcontroller with LIN and BLDC MOSFET Driver for Automotive Applications

TLE9877QXA20
Electrical Characteristics
UGPIO
Logical "1"
V_IH
Undefined
VIL
Logical "0"
IPLK
I PLF
Figure 36 Pull-Down Keep and Force Current
2.33 kOhm (equivalent)
(3.5V / 1.5mA)
7.5 kOhm (equivalent)
(1.5V / 200uA)
I
Current_Diag-Pull _down.vsd
29.5.2 DC Parameters of Port 0, Port 1, TMS and Reset
Note: Operating Conditions apply.
Keeping signal levels within the limits specified in this table ensures operation without overload conditions.
For signal levels outside these specifications, also refer to the specification of the maximum allowed ocurrent
which can be taken out of VDDP.
Table 29 Current Limits for Port Output Drivers¹⁾
Port Output Driver Mode
Maximum Output Current Maximum Output Current Number
(I_OLmax , - I_OHmax)
(I_OLnom , - I_OHnom)
V_DDP ≥ 4.5V 2.6V < V_DDP < V_DDP ≥ 4.5V 2.6V < V_DDP <
4.5V
4.5V
Strong driver²⁾
5 mA
3 mA
1.6 mA
1.0 mA
P_5.1.15
Medium driver³⁾
3 mA
1.8 mA
1.0 mA
0.8 mA
P_5.1.1
Weak driver³⁾
0.5 mA
0.3 mA
0.25 mA
0.15 mA
P_5.1.2
1) Not subject to production test, specified by design.
2) Not available for port pins P0.4, P1.0, P1.1 and P1.2
3) All P0.x and P1.x
Table 30 DC Characteristics Port0, Port1
V_S = 5.5 V to 28 V, T_j = -40 °C to +150 °C, all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Parameter
Input hysteresis
Input hysteresis
Symbol
Values
Min.
Typ. Max.
HYS_{P0_P1} 0.11 x V_DDP –
–
HYS_{P0_P1} –
_exend
0.09 x –
V_DDP
Unit Note /
Number
Test Condition
V ¹⁾ Series
P_5.1.5
resistance = 0 Ω;
4.5V ≤ V_DDP ≤
5.5V
V ¹⁾ Series
P_5.1.16
resistance = 0 Ω;
2.6V ≤ V_DDP ≤
4.5V
Data Sheet
97
Rev. 1.0, 2015-04-30