English
Language : 

TLE9877QXA20_15 Datasheet, PDF (83/122 Pages) Infineon Technologies AG – Microcontroller with LIN and BLDC MOSFET Driver for Automotive Applications
29.1.2 Functional Range
TLE9877QXA20
Electrical Characteristics
Table 18 Functional Range
Tj = -40 °C to +150 °C, all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Parameter
Symbol
Min.
Values
Unit Note /
Number
Typ. Max.
Test Condition
Supply voltage in Active Mode
VS_AM
5.5 –
Extended supply voltage in Active
VS_AM_exte 28
–
Mode
nd
28
V–
P_1.2.1
40
V
1) Functional with P_1.2.16
parameter
deviation
Supply voltage in Active Mode for
MOSFET Driver Supply
VSD_AM
5.4
–
28
V
P_1.2.18
Extended supply voltage in Active
VSD_AM_ext 28
–
Mode for MOSFET Driver Supply
end
32
V
1)Functional with P_1.2.17
parameter
deviation
Specified supply voltage for LIN
Transceiver
VS_AM_LIN 5.5
–
18
V Parameter
P_1.2.2
Specification
Extended supply voltage for LIN
Transceiver
VS_AM_LIN 4.8
–
Supply voltage in Active Mode with VS_AMmin 3.0
–
reduced functionality (Microcontroller /
Flash with full operation)
28
V Functional with P_1.2.14
parameter
deviation
5.5
V
2)
P_1.2.3
Supply voltage in Sleep Mode
VS_Sleep
3.0
–
28
V–
P_1.2.4
Supply voltage transients slew rate dVS/dt -1
–
1
V/µs 3)
P_1.2.5
Output sum current for all GPIO pins IGPIO,sum -50
–
50
mA –
P_1.2.7
Operating frequency
fsys
5
–
24
MHz 4)
P_1.2.15
Junction temperature
Tj
-40 –
150 °C –
P_1.2.9
1) This operation voltage range is only allowed for a short duration: tmax ≤ 400 ms, fsys = 24 MHz, IVDDP = 10 mA, IVDDEXT = 5 mA.
2) Reduced functionality (e.g. cranking pulse) - Parameter deviation possible.
3) Not subject to production test, specified by design.
4) Function not specified when limits are exceeded.
Data Sheet
83
Rev. 1.0, 2015-04-30