TLE9877QXA20_15 Datasheet, PDF (117/122 Pages) Infineon Technologies AG – Microcontroller with LIN and BLDC MOSFET Driver for Automotive Applications

29.13 Operational Amplifier
TLE9877QXA20
Electrical Characteristics
29.13.1 Electrical Characteristics
Table 41 Electrical Characteristics Operational Amplifier
V_S = 5.5 V to 28 V, T_j = -40 °C to +150 °C; all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Parameter
Symbol
Values
Unit Note / Test Condition Number
Min. Typ. Max.
Differential gain
(uncalibrated)
G
9.5
10
10.5
19
20
21
38
40
42
57
60
63
Gain settings GAIN<1:0>: P_13.1.6
00
01
10
11
Differential input operating V_IX
voltage range OP2 - OP1
-1.5 / G –
1.5 / G V
G is the Gain specified
below
P_13.1.1
Operating. common mode V_CM
input voltage range (referred
to GND (OP2 - GND) or
(OP1 - GND)
-2.0 –
2.0
V Input common mode has P_13.1.2
to be checked in
evaluation if it fits the
required range
Max. input voltage range V_IX
(referred to GND (OP_2 -
GND) or (OP1 - GND)
Single ended output voltage V_OUT
range (linear range)
-7.0 –
V_ZERO –
- 1.5
7.0
V
V_ZERO V
+ 1.5
Max. rating of operational P_13.1.3
amplifier inputs, where
measurement is not done
1)2) _{Offset output voltage 2 P_13.1.4}
V ± 1.5V
Linearity error
E_PWM -15
–
15
mV Maximum deviation from P_13.1.5
best fit straight line
divided by max. value of
differential output voltage
range (0.5V - 3.5V); this
parameter is determined
at G = 10.
Linearity error
E_{PWM_%} -1.0
–
1.0
% Maximum deviation from P_13.1.24
best fit straight line
divided by max. value of
differential output voltage
range (0.5V - 3.5V); this
parameter is determined
at G = 10.
Gain drift
-1
–
1
% Gain drift after calibration P_13.1.7
at G = 10.
Data Sheet
117
Rev. 1.0, 2015-04-30