TLE9877QXA20_15 Datasheet, PDF (106/122 Pages) Infineon Technologies AG – Microcontroller with LIN and BLDC MOSFET Driver for Automotive Applications

TLE9877QXA20
Electrical Characteristics
Table 34 Supply Voltage Signal Conditioning (cont’d)
V_S = 5.5 V to 28 V, T_j = -40 °C to +150 °C, all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Parameter
Symbol
Values
Unit Note / Test Condition Number
Min. Typ. Max.
Accuracy of V_SD sense
after calibration
∆V_SD
-440 –
440 mV V_S = 5.5V to 18V,
T_j = -40..85°C
P_8.1.47
Charge Pump Voltage Measurement V_CP
Input to output voltage
ATT_VCP
–
0.023 –
–
attenuation:
V_CP
Nominal operating input
voltage range V_CP
V_CP,range
2.5 –
52 V ¹⁾
Accuracy of V_CP sense
after calibration
∆V_CP
-747 –
747 mV V_S = 5.5V to 18V,
T_j = -40..85°C
P_8.1.56
P_8.1.7
P_8.1.62
Monitoring Input Voltage Measurement
Input to output voltage
attenuation:
V_MON
Nominal operating input
voltage range V_MON
Accuracy of V_MON sense
after calibration
ATT_VMON
V_MON,range
∆V_MON
V_MON
–
2.5
-440
0.039
–
–
Pad Supply Voltage Measurement V_VDDP
Input-to-output voltage
ATT_VDDP
–
attenuation:
V_DDP
Nominal operating input V_DDP,range
0
voltage range V_DDP
Accuracy of V_DDP sense
after calibration
∆V_{DDP_SENSE} -105
0.164
–
–
10-Bit ADC Reference Voltage Measurement V_AREF
Input to output voltage
attenuation:
ATT_VAREF
–
0.219
V_AREF
Nominal operating input V_AREF,range
0
–
voltage range V_AREF
Accuracy of V_AREF sense ∆V_AREF
after calibration
-79 –
8-Bit ADC Reference Voltage Measurement
Input-to-output voltage
ATT_VBG
–
attenuation:
V_BG
V_BG
0.75
–
–
31 V ¹⁾
440 mV V_S = 5.5V to 18V,
T_j = -40..85°C
–
–
7.50 V ¹⁾
105 mV ²⁾V_S = 5.5 to 18V,
T_j = -40..85°C
–
–
5.62 V ¹⁾
79 mV V_S = 5.5V to 18V,
T_j = -40..85°C
–
–
P_8.1.49
P_8.1.8
P_8.1.68
P_8.1.33
P_8.1.50
P_8.1.5
P_8.1.22
P_8.1.51
P_8.1.48
P_8.1.57
Data Sheet
106
Rev. 1.0, 2015-04-30