TC1793 Datasheet, PDF (94/189 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller

TC1793
PinningTC1793 Pin Configuration
Table 2
Pin Definitions and Functions (cont’d)
Pin Symbol
Ctrl. Type Function
A1,
AF1,
AF26,
A24,
C22,
AC21,
AD23,
AE22,
AE23
N.C.
-
-
Not connected. These pins are reserved for
future extension and shall not be connected
externally.
1) Only applicable in TC1793ED. Reserved in TC1793PD.
2) Only available for SAK-TC1793F-512F270EF, SAK-TC1793F-512F200EF, and SAK-TC1793F-512F200EB.
3) The MTSR output of SSCx is overlayed with the MRSTG input of the related SSCGx
4) Analog Input overlayed with a SENT Digitial Input. The related port logic is used configure the input as either
analog input (default after reset) or digital input. The related port logic supports only the port input features as
the connected pads are input pads only.
5) IOZ1 valid for this pin is the parameter with overlayed = No in the ADC parameter table.
6) IOZ1 valid for this pin is the parameter with overlayed = Yes in the ADC parameter table.
Legend for Table 2
Column “Ctrl.”:
I = Input (for GPIO port lines with IOCR bit field selection PCx = 0XXX_B)
O = Output
O0 = Output with IOCR bit field selection PCx = 1X00_B
O1 = Output with IOCR bit field selection PCx = 1X01_B (ALT1)
O2 = Output with IOCR bit field selection PCx = 1X10_B(ALT2)
O3 = Output with IOCR bit field selection PCx = 1X11(ALT3)
Column “Type”:
A1 = Pad class A1 (LVTTL)
A1+ = Pad class A1+ (LVTTL)
A2 = Pad class A2 (LVTTL)
B = Pad class B(LVTTL)
F = Pad class F (LVDS/CMOS)
D = Pad class D (ADC)
S = Pad class S(SENT)
PU = with pull-up device connected during reset (PORST = 0)
PD = with pull-down device connected during reset (PORST = 0)
TR = tri-state during reset (PORST = 0)
Data Sheet
87
V 1.2, 2014-05