TC1793 Datasheet, PDF (11/189 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller

TC1793
Summary of Features
– Two General Purpose Timer Array Modules (GPTA) with additional Local Timer
Cell Array (LTCA2) providing a powerful set of digital signal filtering and timer
functionality to realize autonomous and complex Input/Output management
– Two Capture / Compare 6 modules
– Two General Purpose 12 Timer Units (GPT120 and GPT121)
• 44 analog input lines for ADC
– 4 independent kernels (ADC0, ADC1, and ADC2)
– Analog supply voltage range from 3.3 V to 5 V (single supply)
• 4 different FADC input channels
– channels with impedance control and overlaid with ADC1 inputs
– Extreme fast conversion, 21 cycles of f_FADC clock
– 10-bit A/D conversion (higher resolution can be achieved by averaging of
consecutive conversions in digital data reduction filter)
• 8 digital input lines for SENT
– communication according to the SENT specification J2716 FEB2008
• 221 digital general purpose I/O lines (GPIO)
• Digital I/O ports with 3.3 V capability
• On-chip debug support for OCDS Level 1 (CPU, PCP, DMA, On Chip Buses)
• Dedicated Emulation Device chip available (TC1793ED)
– multi-core debugging, real time tracing, and calibration
– four/five wire JTAG (IEEE 1149.1) or two wire DAP (Device Access Port) interface
• Power Management System
• Clock Generation Unit with PLL and PLL_ERAY
• Flexible CRC Engine (FCE)
– IEEE 802.3 CRC32 ethernet polynomial: 0x82608EDB (CRC kernel 0)
– CRC32C Castagnoli: 0xD419CC15 (CRC kernel 1)
The SAK-TC1793N-512F270EF has the following features:
• High-performance 32-bit super-scalar TriCore V1.6 CPU with 6-stage pipeline
– Superior real-time performance
– Strong bit handling
– Fully integrated DSP capabilities
– Multiply-accumulate unit able to sustain 2 MAC operations per cycle
– Fully pipelined Floating point unit (FPU)
– 270 MHz operation at full temperature range
• 32-bit Peripheral Control Processor with single cycle instruction (PCP2)
– 16 Kbyte Parameter Memory (PRAM)
– 32 Kbyte Code Memory (CMEM)
– 200 MHz operation at full temperature range
• Multiple on-chip memories
– 4 Mbyte Program Flash Memory (PFLASH) with ECC
– 192 Kbyte Data Flash Memory (DFLASH) usable for EEPROM emulation
– 2 x 8 Kbyte Key Flash
Data Sheet
4
V 1.2, 2014-05