|
TC1793 Datasheet, PDF (184/189 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller | |||
|
◁ |
TC1793
History
6
History
The following changes where done between Version 0.6 and 0.62 of this document:
⢠Change for port 1.7 the symbol from CC60INB to CC61INB for the CCU60 input
⢠Add footnote to port 4.1 alternate output 3 MTSR2
⢠change function description for port 4.1 alternate output 3 MTSR2 from Slave to
Master Transmit
⢠Add footnote to port 6.4 alternate output 1 MTSR1
⢠Add footnote to port 7.1 alternate output 2 MTSR3
⢠Change for port 8.2 the symbol from CC61 (CCU60) to COUT63 (CCU61)
⢠Change for port 8.3 the symbol from OUT43 (GPTA1) to CC62 (CCU60)
⢠correct typo for port 9.4 from COUT&= to COUT60
⢠correct typo for port 9.5 from COUT&! to COUT61
⢠Change for port 15.4 and 15.5 the type from B1 to B
⢠Change for port 15 the type from S to D / S
⢠add clarification that table 11 defines the conditions for all other parameters
⢠add conditions for MLI, MSC, SSC, parameters
⢠add parameters dTxdly and dRxdly to ERAY parameters
⢠correct footnotes for ERAY parameters
⢠split flash parameters tPRD and tPRP in two conditions
⢠add conditions to LVDS pad parameters
⢠remove Pin Reliability in Overload section
⢠add parameters IIN and Sum IIN to absolute ratings
⢠add parameter HYSX to PSC_XTAL
⢠added RDSON values for all driver settings (weak, medium, and strong)
⢠removed footnote 2 of table 10
⢠change load for timing of SSC, MSC, and MLI from CL = 25 pF to CL = 50 pF (typical)
⢠add to parameters tRF and tFF condition CL = 50 pF
⢠add new footnote 7) to ADC parameter table
⢠add min and max value for QCONV and adapt typ value
⢠add load conditions for tFF1 and tRF1
⢠add conditions to PLL parameter tL
⢠change DAP parameter t19 from SR to CC classification
⢠remove footnote 2 for the FADC
⢠adapt IDs for AB step
â¢
⢠removed footnote 2 in table 9
⢠change max value for ADC parameter tS from 255 to 257
â¢
The following changes where done between Version 0.62 and 0.63 of this document:
⢠shift Output function CC62 of CCU60 for P8.3 from O3 to O2
⢠remove output function OUT43 for GPTA1 for P8.3
Data Sheet
1
V 1.2, 2014-05
|
▷ |