TC1130_08 Datasheet, PDF (82/114 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller

TC1130
Electrical Parameters
4.1.3 Operating Condition
The following operating conditions must be complied with in order to ensure correct
operation of the TC1130. All parameters specified in the following table refer to these
operating conditions, unless otherwise indicated.
Parameter
Symbol Limit Values
min.
max.
Unit Notes
Conditions
Digital supply voltage
Digital ground voltage
Digital core supply current
Ambient temperature under
bias
CPU clock
Overload current
Short circuit current
Absolute sum of overload +
short circuit currents
V_DD
V_DDP
V_SS
I_DD
T_A
f_SYS
I_OV
I_SC
Σ|I_OV| +
|I_SC|
1.43
3.14
–
-40
–¹⁾
-1
-3
-1
-3
–
1.58
3.47
0
525
+85
150
1
3
1
3
|50|
|100|
V–
V–
V–
mA –
°C –
MHz –
mA ²⁾³⁾
duty cycle ≤ 25%
mA ⁴⁾
duty cycle ≤ 25%
mA ³⁾
duty cycle ≤ 25%
Inactive device pin current I_ID
(V_DD = V_DDP = 0)
External load capacitance C_L
ESD strength
–
-1
1
–
50
2000 –
mA –
pF –
V Human Body
Model (HBM)
1) _{The TC1130 uses a static design, so the minimum operation frequency is 0 MHz. However, due to test time}
restriction no lower frequency boundary is tested.
2) _{Overload conditions occur if the standard operating conditions are exceeded, i.e. the voltage on any pin}
exceeds the specified range (i.e. V_OV > V_DDP + 0.5 V or V_OV < V_SS - 0.5 V). The absolute sum of input
overload currents on all digital I/O pins may not exceed 50 mA. The supply voltage must remain within the
specified limits.
3) _{Not subject to production test, verified by design/characterization.}
4) _{Applicable for digital inputs.}
Data Sheet
76
V1.1, 2008-12