English
Language : 

TLD5541-1QV Datasheet, PDF (72/82 Pages) Infineon Technologies AG – H-Bridge DC/DC Controller with SPI Interface
H-Bridge DC/DC Controller with SPI Interface
TLD5541-1QV
Serial Peripheral Interface (SPI)
Table 12-3 Register description (cont’d)
Register name Field
Bits Type Purpose
MFSSETUP1
MFSSETUP2
LEDCHAIN
EOMFS
SOMFS
ILIM_HALF
EA_IOUT_MFS
MFSDLY
3:0 r/w
4r
5 r/w
6 r/w
7 r/w
7:0 r/w
Multifloat Switch and LED Count configuration Register
Number of LEDs in series informations bits: change the
VVFB1,2_S2G threshold and set the MFS jump Initial/Final LED
number
0001B, 1 LED
0010B, 2 LEDs
0011B, 3 LEDs
0100B, 4 LEDs
0101B, 5 LEDs
0110B, 6 LEDs
0111B, 7 LEDs
1000B, (default) 8 LEDs
1001B, 9 LEDs
1010B, 10 LEDs
1011B, 11 LEDs
1100B, 12 LEDs
1101B, 13 LEDs
1110B, 14 LEDs
1111B, 15 LEDs
0000B, 16 LEDs
End of MFS routine bit:
0B , (default) MFS routine not completed, not successful
performed or never run.
1B , MFS routine successfully performed (is reset to 0B
when SOMFS is set to 1B).
Start of MFS routine bit:
0B , (default) MFS routine not activated
1B , MFS routine activated
Adjust Current Limit (Switch Peak Over Current Threshold)
during MFS operation:
0B , (default) Switch Peak Over Current Threshold 100%
1B , Switch Peak Over Current Threshold 50%
Bit to decrease the saturation current of the error amplifier
(A6) in current mode control loop only during MFS routine:
0B , (default) inactive
1B , active: error amplifier current reduced to 20%
Multifloatswitch configuration register 2 (delay time
programming)
00000000B, smallest delay time in respect to fSW
11111111B, largest delay time in respect to fSW
10000000B, (default) delay time in respect to fSW
Data Sheet
72
Rev. 1.0, 2016-05-20