TLD5541-1QV Datasheet, PDF (12/82 Pages) Infineon Technologies AG – H-Bridge DC/DC Controller with SPI Interface

H-Bridge DC/DC Controller with SPI Interface
TLD5541-1QV
General Product Characteristics
Table 2 Absolute Maximum Ratings¹⁾ (cont’d)
T_j = -40°C to +150°C; all voltages with respect to AGND, (unless otherwise specified)
Parameter
Symbol
Values
Unit Note /
Number
Min. Typ. Max.
Test Condition
FBH, FBL
Feedback Error Amplifier voltage
V_{FBH, FBL} -0.3 –
60
V–
P_4.1.14
FBH-FBL
Feedback Error Amplifier differential
voltage
V_FBH-FBL -0.5 –
0.5
V–
P_4.1.15
EN/INUVLO
Device enable/input undervoltage
lockout
V_EN/INUVLO -0.3
–
60
V–
P_4.1.16
Digital (I/O) Pins
PWMI
Digital Input voltage
V_PWMI
-0.3 –
5.5
V–
P_4.1.17
CSN
Voltage at Chip Select pin
V_CSN
-0.3 – 5.5 V –
P_4.1.18
SCLK
Voltage at Serial Clock pin
V_SCLK
-0.3 –
5.5 V –
P_4.1.19
SI
Voltage at Serial Input pin
V_SI
-0.3 – 5.5 V –
P_4.1.20
SO
Voltage at Serial Output pin
V_SO
-0.3 – 5.5 V –
P_4.1.21
SYNC
Synchronization Input voltage
V_SYNC
-0.3 –
5.5
V–
P_4.1.22
LHI
Limp Home Input Voltage
V_LHI
-0.3 – 5.5 V –
P_4.1.58
Analog Pins
VFB
Loop Input voltage
V_VFB
-0.3 – 5.5 V –
P_4.1.25
INOVLO
Input overvoltage lockout
V_INOVLO -0.3 –
5.5
V–
P_4.1.26
SET
Analog dimming Input voltage
V_SET
-0.3 – 5.5 V –
P_4.1.29
COMP
Compensation Input voltage
V_COMP
-0.3 –
3.6
V–
P_4.1.30
SOFT_START
Softstart Voltage
FREQ
Voltage at frequency selection pin
V_{SOFT_STA} -0.3 –
3.6
V–
RT
V_FREQ
-0.3 –
3.6
V–
P_4.1.31
P_4.1.32
IINMON
Voltage at input monitor pin
V_IINMON -0.3 –
3.6
V–
P_4.1.33
IOUTMON
Voltage at output monitor pin
V_IOUTMON -0.3 –
5.5
V–
P_4.1.34
Temperatures
Junction Temperature
T_j
-40 – 150 °C –
P_4.1.35
Data Sheet
12
Rev. 1.0, 2016-05-20