TC1784 Datasheet, PDF (53/123 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller

TC1784
Electrical ParametersGeneral Parameters
5.1.3 Absolute Maximum Ratings
Stresses above the values listed under “Absolute Maximum Ratings” may cause
permanent damage to the device. This is a stress rating only and functional operation of
the device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions may affect device reliability.
Table 5
Absolute Maximum Rating Parameters
Parameter
Symbol
Values
Min. Typ. Max.
Unit Note /
Test Con
dition
Storage temperature
T_ST SR -65 –
Voltage at 1.3 V power supply V_DD SR – –
pins with respect to V_SS
Voltage at 3.3 V power supply V_DDP
pins with respect to V_SS
SR
––
Voltage at 5 V power supply V_DDM SR – –
pins with respect to V_SS
Voltage on any Class A input V_IN SR -0.7 –
pin and dedicated input pins
with respect to V_SS
Voltage on any Class D
V_AIN
-0.6 –
analog input pin with respect V_AREFx
to V_AGND0
SR
Voltage on any shared Class V_AINF
-0.6 –
D analog input pin with
SR
respect to V_SSAF, if the FADC
is switched through to the pin.
150
°C –
2.0
V–
4.33
V–
7.0
V–
V_DDP + 0.5 V
or max. 4.33
Whatever
is lower
7.0
V–
7.0
V–
Input current on any pin
I_IN
during overload condition
-10 – +10
mA –
Absolute maximum sum of all I_IN
input circuit currents for one
port group during overload
condition¹⁾
-25 – +25
mA –
Absolute maximum sum of all ΣI_IN
input circuit currents during
overload condition
-200 – 200
mA –
1) The port groups are defined in Table 10.
Data Sheet
46
V 1.1.1, 2014-05