TC1784 Datasheet, PDF (110/123 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller

5.3.8.5 EBU Timings
TC1784
Electrical ParametersAC Parameters
EBU Asynchronous Timings
V_SS = 0 V;V_DD = 1.3 V ± 5%; V_DDEBU = 2.5 V ± 5% and 3.3 V ± 5%, Class A2 pins;
C_L = 35 pF for address/data; C_L = 40pF for the control lines.
For each timing, the accumulated PLL jitter of the programed duration in number of clock
periods must be added separately. Operating conditions apply and C_L = 35 pF.
Table 34 EBU Common Asynchronous Timings
Parameter
Symbol
Values
Min. Typ. Max.
Pulse wdih deviation from t_a CC -0.8 −
0.8
the ideal programmed
-0.8 −
0.8
width due to B pad
asymmetry, rise delay - fall
delay
AD(31:0) output delay to t₁₃ CC -5.5 −
2
ADV# rising edge,
multiplexed read / write
AD(31:0) output delay to t₁₄ CC -5.5 −
2
ADV# rising edge,
multiplexed read / write
Unit Note /
Test Condition
ns edge= medium
ns edge= sharp
ns
ns
Table 35 EBU Asynchronous Read Timings
Parameter
Symbol
Values
Min. Typ. Max.
A(23:0) output delay to RD t₀ CC -2.5 −
2.5
rising edge, deviation from
the ideal programmed
value
A(23:0) output delay to RD t₁ CC -2.5 −
2.5
rising edge, deviation from
the ideal programmed
value
Unit Note /
Test Condition
ns
ns
Data Sheet
103
V 1.1.1, 2014-05