TLE8110EE_13 Datasheet, PDF (28/74 Pages) Infineon Technologies AG – Overvoltage, Overtemperature, ESD -Protection

TLE 8110 EE
Smart Multichannel Switch
Power Outputs
Table 3 Performance^1)2)3)4) in case of Parallel Connection of Channels: related PM-Bit NOT set
Pos. Parameter
Symbol
Channels in Parallel Unit Conditions
2x
3x
4x
Channel Group 1-4
7.4.1 Maximum overall current before I_Dsum(low) 5.1
7.6
10.1 A
1)
reaching lower limit threshold
7.4.2 Maximum overall Repetitive
Clamping Energy
E_ARsum
18
-
-
mJ I_D=1.0A
10⁹ cycles
8
13
19
mJ I_D=1.75A
10⁹ cycles
-
8
11
mJ I_D=2.5A
10⁹ cycles
-
-
9
mJ I_D=3.0A
10⁹ cycles
Channel Group 5-6
7.4.3 Maximum overall current before I_Dsum(low) 7.2
-
-
A
reaching lower limit threshold
7.4.4 Maximum overall Repetitive
Clamping Energy
E_ARsum
22
-
-
mJ I_D=1.3A
10⁹ cycles
11
-
-
mJ I_D=2.2A
10⁹ cycles
Channel Group 7-10
7.4.5 Maximum overall current before I_Dsum(low) 3.3
5.0
6.6
A
reaching lower limit threshold
7.4.6 Maximum overall Repetitive
Clamping Energy
E_ARsum
7
-
-
mJ I_D=0.7A
10⁹ cycles
3
4
7
mJ I_D=1.2A
10⁹ cycles
-
3
4
mJ I_D=1.6A
10⁹ cycles
-
-
3
mJ I_D=2.1A
10⁹ cycles
1) The performance during parallel connection of channels is specified by design and not subject to the production test.
2) Homogenous power distribution over all channels (all power stages equally heated), dependent on cooling set-up.
3) This lifetime statement is an anticipation based on an extrapolation of Infineon's qualification test results. The actual lifetime
of a component depends on its form of application and type of use etc. and may deviate from such statement. The lifetime
statement shall in no event extend the agreed warranty period.
4) Triangular Pulse Shape (inductance discharge): I_D(t) = I_D(0)·(1 - t / t_pulse); 0 < t < t_pulse.
Data Sheet
28
Rev. 1.4, 2013-07-02