TLE8110EE_13 Datasheet, PDF (23/74 Pages) Infineon Technologies AG – Overvoltage, Overtemperature, ESD -Protection

TLE 8110 EE
Smart Multichannel Switch
Power Outputs
Electrical Characteristics: Power Outputs (cont’d)
3.0V < V_CC < 5.5V; 4.5V < V_DD < 5.5V, T_j = -40°C to +150°C, all voltages with respect to ground, positive current
flowing into pin
(unless otherwise specified)
Pos. Parameter
Symbol
Limit Values
Unit Conditions
Min. Typ. Max.
Clamping Voltage
7.3.10 Output Clamping Voltage, Channel V_DScl
45
55
60
V
1 to 10
Timing
7.3.11 Output Switching Frequency
f_OUTx
-
-
20
kHz ¹⁾
resistive load
duty cycle > 25%.
7.3.12 Turn-on Time
t_dON
-
5
10
µs
V_DS=20% of V_batt
V_batt = 13.5V,
I_DS1 to I_DS6 = 1A,
I_DS7 to I_DS10 = 0.5A,
resistive load
7.3.13 Turn-off Time
t_dOFF
-
5
10
µs
V_DS=80% of V_batt
V_batt = 13.5V,
I_DS1 to I_DS6 = 1A,
I_DS7 to I_DS10 = 0.5A
resistive load
1) Parameter is not subject to production test, specified by design.
2) Either one of the values has to be considered as worst case limitation. Cumulative scenario and wide range of operating
conditions are treated in the Application Note “Switching Inductive Loads - TLE8110 addendum”.
3) This lifetime statement is an anticipation based on an extrapolation of Infineon's qualification test results. The actual lifetime
of a component depends on its form of application and type of use etc. and may deviate from such statement. The lifetime
statement shall in no event extend the agreed warranty period.
4) Triangular Pulse Shape (inductance discharge): I_D(t) = I_D(0)·(1 - t / t_pulse); 0 < t < t_pulse.
5) Repetitive operation not allowed. Starting T_j must be kept within specs. In case of high energy pulse an immediate switch-
off strategy is recommended
Data Sheet
23
Rev. 1.4, 2013-07-02