TLE8110EE_13 Datasheet, PDF (12/74 Pages) Infineon Technologies AG – Overvoltage, Overtemperature, ESD -Protection

TLE 8110 EE
Smart Multichannel Switch
General Product Characteristics
Absolute Maximum Ratings¹⁾ (cont’d)
T_j = -40°C to +150°C; all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Pos.
Parameter
Symbol
Limit Values Unit
Min.
Max.
4.1.20 Electro Static Discharge Voltage
“Charged Device Model - CDM”
V_ESD
-500
500
V
4.1.21 Electro Static Discharge Voltage
“Charged Device Model - CDM”
V_ESD
-750
750
V
1) Not subject to production test, specified by design.
2) One single channel per time.
3) Triangular Pulse Shape (inductance discharge): I_D(t) = I_D(0)·(1 - t / t_pulse); 0 < t < t_pulse.
4) ESD susceptibility, HBM according to EIA/JESD 22-A114-B
5) ESD susceptibility, Charged Device Model “CDM” EIA/JESD22-C101-C
Conditions
All Pins
CDM⁵⁾
Pin 1, 18, 19, 36
(corner pins)
CDM⁵⁾
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
4.2
Functional Range
Pos. Parameter
Supply Voltages
4.2.1 Analogue Supply Voltage
4.2.2 Digital Supply Voltage
4.2.3 Digital Supply Voltage
Power Stages
4.2.4 Ground Current
Temperatures
4.2.5 Junction Temperature
4.2.6 Junction Temperature
Symbol
Limit Values
Min.
Max.
V_DD
4.5
5.5
V_CC
3
V_DD
V_CC
V_DD
5.5
I_{GND_typ}
T_j
-40
T_j
-40
9
150
175
Unit Conditions
V
–
V
–
V
leakage Currents
(I_CC) might increase
if V_CC > V_DD.
A
resistive loads¹⁾
°C -
°C
1) _{for 100hrs}
1) Not subject to production test, specified by design.
Note: Within the functional range the IC operates as described in the circuit description. The electrical
characteristics are specified within the conditions given in the related electrical characteristics table.
Data Sheet
12
Rev. 1.4, 2013-07-02