TLE6262G Datasheet, PDF (26/38 Pages) Infineon Technologies AG – Fault Tolerant CAN - LDO

Final Data TLE 6262 G
2.3 Electrical Characteristics (cont’d)
9 V < V_S < 16 V; I_CC = -100 mA; normal mode; all outputs open; – 40 °C < T_j < 150 °C; CAN-
transceiver circuitry: – 40 °C < T_j < 125 °C; all voltages with respect to ground; positive current
defined flowing into pin; unless otherwise specified.
Parameter
Symbol Limit Values Unit Test Condition
min. typ. max.
CAN-Transceiver
Dynamic Characteristics
CANH and CANL bus output t_rd
transition time recessive-to-
dominant
CANH and CANL bus output t_dr
transition time dominant-to-
recessive
Minimum dominant time for t_wu(min)
wake-up on CANL or CANH
Failure cases 3 and 6
t_fail
detection time
Failure case 6a detection
time
Failure cases 5, 6, 6a and 7
recovery time
Failure cases 3 recovery time
Failure cases 5 and 7
detection time
Failure cases 5 detection
t_fail
time
Failure cases 6, 6a and 7
detection time
Failure cases 5, 6, 6a and 7
recovery time
0.6 1.2 2.1 µs ^{10% to 90%;}
C₁ = 10 nF;
C₂ = 0; R₁ = 100 W
0.3 0.6 1.3 µs ^{10% to 90%;}
C₁ = 1 nF; C₂ = 0; R₁ =
100 W
12
20
38
µs ^{stand-by mode;}
V_S = 13.5 V
30 45 80 µs
2.0 4.8 8.0 ms
30 45 80 µs
250 500 750 µs
1.0 2.0 4.0 ms
0.4 1.0 2.4 ms ^{stand-by modes;}
V_S = 13.5 V
0.8 4.0 8.0 ms ^{stand-by modes;}
V_S = 13.5 V
0.4 1.0 2.4 µs ^{stand-by modes;}
V_S = 13.5 V
26
version: 2.03 date: 2002-03-20