TLE6262G Datasheet, PDF (24/38 Pages) Infineon Technologies AG – Fault Tolerant CAN - LDO

Final Data TLE 6262 G
2.3 Electrical Characteristics (cont’d)
9 V < V_S < 16 V; I_CC = -100 mA; normal mode; all outputs open; – 40 °C < T_j < 150 °C; CAN-
transceiver circuitry: – 40 °C < T_j < 125 °C; all voltages with respect to ground; positive current
defined flowing into pin; unless otherwise specified.
Parameter
Symbol Limit Values Unit Test Condition
min. typ. max.
CANL dominant output
voltage
V_CANLd
–
1.0 1.4 V
TxD = 0 V;
I_CANL = 40 mA
CANH output current
CANL output current
I_CANH
I_CANL
Voltage detection threshold V_det(th)
for short-circuit to battery
voltage on CANH and CANL
-110 -80
-5 0
50 80
-5 0
6.5 7.3
-50 mA ^VCANH ^{= 0 V;}
TxD = 0 V
5
µA ^{sleep mode;}
V_CANH = 12 V
110 mA ^VCANL ^{= 5 V;}
TxD = 0 V
5
µA ^{sleep mode;}
V_CANL = 0 V;
V_S = 0 V
8.0 V
normal operation
mode
CANH wake-up voltage
threshold
V_WAKEH 1.2 1.9 2.7 V
–
CANL wake-up voltage
threshold
V_WAKEL 2.2 3.1 3.9 V
–
CANH single-ended receiver V_CANH
threshold
1.6 2.1 2.6 V
failure cases 3, 5 and
7
CANL single-ended receiver V_CANL
threshold
2.4 3.0 3.4 V
failure case 6 and 6a
CANL leakage current
CANH leakage current
I_CANLl
-5
0
5
µA ^VCC ^{= 0 V, V}S ^{= 0 V,}
V_CANL = 13.5 V,
T_j < 85 °C
I_CANHl
-5
0
5
µA ^VCC ^{= 0 V;V}S ^{= 0 V;}
V_CANH = 5 V;
T_j < 85 °C
Termination Outputs RTL, RTH
RTL to V_CC switch-on
resistance
R_RTL
–
RTL to BAT switch series R_oRTL 5
resistance
40
95
W
I_o = – 10 mA;
15
30
kW ^VBAT^-stand-by
24
version: 2.03 date: 2002-03-20