TLE6262G Datasheet, PDF (20/38 Pages) Infineon Technologies AG – Fault Tolerant CAN - LDO

Final Data TLE 6262 G
2.3 Electrical Characteristics (cont’d)
9 V < V_S < 16 V; I_CC = -100 mA; normal mode; all outputs open; – 40 °C < T_j < 150 °C; CAN-
transceiver circuitry: – 40 °C < T_j < 125 °C; all voltages with respect to ground; positive current
defined flowing into pin; unless otherwise specified.
Parameter
Symbol Limit Values Unit Test Condition
min. typ. max.
Long open window (32 cyl.) I_CCWDhys 12.2 16.2 20.4 ms
R_OSC = 453kW
sleep mode (WD OFF)
to normal mode
Switches
Under-Voltage Lockout (bit 3 of SPI diagnosis word)
UV-Switch-ON voltage
UV-Switch-OFF voltage
UV-ON/OFF-Hysteresis
V_{UV ON}
V_{UV OFF}
V_{UV HY}
–
5.35 6.00 V
4.50 4.85 5.20 V
–
0.5 –
V
V_S increasing
V_S decreasing
V_{UV ON} – V_{UV OFF}
High Side Output OUTH1; (controlled by PWM or bit 1 of SPI input word)
Static Drain-Source
R _{– DSON H1}
1.0 2.0 W
ON-Resistance;
I_OUTH1 = -0.25 A
1.5 4.0 W
Active zener voltage
V_OUTH1 -5.0 -3.0 -0.5 V
Clamp diode forward voltage V_OUTH1
0.8 1
V
Leakage current
I_OLH1
-100 -5 –
µA
Switch ON delay time
t_dONH1
10 100 ms
Switch OFF delay time
t_dOFFH1
20 100 ms
Overcurrent shutdown
threshold
Shutdown delay time
Current limit
I_SDH1
t_dSDH1
I_OCLH1
-1.0 -0.6 -0.3 A
10 25 50 ms
-2.0 -1.0 -0.5 A
5.2 V £ V_S £ 9 V
I_OUTH1 = – 0.25 A
I_OUTH1 = 0.25 A
V_OUTH1 = 0 V
PWM to OUTH1;
R_L = 100 W
PWM to OUTH1;
R_L = 100 W
–
20
version: 2.03 date: 2002-03-20