TLE6262G Datasheet, PDF (21/38 Pages) Infineon Technologies AG – Fault Tolerant CAN - LDO

Final Data TLE 6262 G
2.3 Electrical Characteristics (cont’d)
9 V < V_S < 16 V; I_CC = -100 mA; normal mode; all outputs open; – 40 °C < T_j < 150 °C; CAN-
transceiver circuitry: – 40 °C < T_j < 125 °C; all voltages with respect to ground; positive current
defined flowing into pin; unless otherwise specified.
Parameter
Symbol Limit Values Unit Test Condition
min. typ. max.
PWM Input to control OUTH1; Pin PWM (high active)
H-input voltage threshold
V_IH
L-input voltage threshold
V_IL
Hysteresis of input voltage V_IHY
Pull down current
I_I
Input capacitance
C_I
–
–
0.2 –
´V_cc
50 200
5
25
–
10
0.7 V
´V_CC
–
V
500 mV
180 mA
15 pF
–
–
–
V_I = 0.2 * V_CC
0 V < V_CC < 5.25 V
High Side Output OUTH2; (controlled by bit 2 of SPI input word)
Static Drain-Source
R _{– DSON H2}
1.0 2.0 W
ON-Resistance;
I_OUTH2 = -0.25 A
1.5 4.0 W
Active zener voltage
V_OUTH2 -5.0 -3.0 -0.5 V
Clamp diode forward voltage V_OUTH2
0.8 1
V
Leakage current
I_OLH1
-100 -5 –
µA
Switch ON delay time
t_dONH1
10 100 µs
Switch OFF delay time
t_dOFFH1
20 100 µs
5.2 V £ V_S £ 9 V
I_OUTH2 = – 0.25 A
I_OUTH2 = 0.25 A
V_OUTH2 = 0 V
CSN high to OUTH2;
R_L = 100 W
CSN high to OUTH2;
R_L = 100 W
High Side Output OUTH3; (controlled by bit 3 and bit 4 of SPI input word)
Static Drain-Source
R _{– DSON H3}
1.5 3.0 W
ON-Resistance;
I_OUTH3 = -0.15 A
2.0 5.0 W
Active zener voltage
V_OUTH3 -5.0 -3.0 -0.5 V
Clamp diode forward voltage V_OUTH3
0.8 1
V
Leakage current
I_OLH3
-100 -5 –
µA
5.2 V £ V_S £ 9 V
I_OUTH3 = – 0.15 A
I_OUTH3 = 0.15 A
V_OUTH3 = 0 V
21
version: 2.03 date: 2002-03-20