HYB39L128160AC Datasheet, PDF (22/49 Pages) Infineon Technologies AG – 128-MBIT SYNCHRONOUS LOW-POWER DRAM

HYB 39L128160AC/T
128-MBit 3.3V Mobile-RAM
7LPLQJ 'LDJUDPV
1. Bank Activate Command Cycle
2. Burst Read Operation
3. Read Interrupted by a Read
4. Read to Write Interval
4.1 Read to Write Interval
4.2 Minimum Read to Write Interval
4.3 Non-Minimum Read to Write Interval
5. Burst Write Operation
6. Write and Read Interrupt
6.1 Write Interrupted by a Write
6.2 Write Interrupted by Read
7. Burst Write & Read with Auto-Precharge
7.1 Burst Write with Auto-Precharge
7.2 Burst Read with Auto-Precharge
8. AC- Parameters
8.1 AC Parameters for a Write Timing
8.2 AC Parameters for a Read Timing
9. Mode Register Set
10. Power on Sequence and Auto Refresh (CBR)
11. Clock Suspension (using CKE)
11. 1 Clock Suspension During Burst Read CAS Latency = 2
11. 2 Clock Suspension During Burst Read CAS Latency = 3
11. 3 Clock Suspension During Burst Write CAS Latency = 2
11. 4 Clock Suspension During Burst Write CAS Latency = 3
12. Power Down Mode and Clock Suspend
13. Self Refresh ( Entry and Exit )
14. Auto Refresh ( CBR )
15. Random Column Read ( Page within same Bank)
15.1 CAS Latency = 2
15.2 CAS Latency = 3
16. Random Column Write ( Page within same Bank)
16.1 CAS Latency = 2
16.2 CAS Latency = 3
17. Random Row Read ( Interleaving Banks) with Precharge
17.1 CAS Latency = 2
17.2 CAS Latency = 3
18. Random Row Write ( Interleaving Banks) with Precharge
18.1 CAS Latency = 2
18.2 CAS Latency = 3
19. Precharge Termination of a Burst
INFINEON Technologies
22
2003-02