XC167-16 Datasheet, PDF (213/442 Pages) Infineon Technologies AG – 16-Bit Single-Chip Microcontroller with C166SV2 Core Volume 2 (of 2): Peripheral Units

XC167-16 Derivatives
Peripheral Units (Vol. 2 of 2)
Capture/Compare Unit 6 (CAPCOM6)
Register PSLR defines the passive state level driven by the output pins of the module.
The passive state level is the value that is driven by the port pin during the passive state
of the output. During the active state, the corresponding output pin drives the active state
level, which is the inverted passive state level. The passive state level permits to adapt
the driven output levels to the driver polarity (inverted, not inverted) of the connected
power stage.
CCU6_PSLR
Passive State Level Register
XSFR (E8C4_H/--)
Reset Value: 0000_H
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
-
-
-
-
-
-
-
-
PSL
63
-
PSL
- - - - - - - - rwh -
rwh
Field
PSL63
PSL
Bits Type Description
7
rwh T13 Output COUT63 Passive State Level Control
This bitfield defines the passive level of the output pin
COUT63.
0 The passive level is 0
1 The passive level is 1
[5:0] rwh
T12 Outputs Passive State Level Control
Defines the passive level driven by the module
outputs during the passive state.
0 The passive level is 0
1 The passive level is 1
PSL[5:0] corresponds to (left to right):
COUT62, CC62, COUT61, CC61, COUT60, CC60.
User’s Manual
CAPCOM6_X, V2.0
18-68
V2.0, 2004-04