XC167-16 Datasheet, PDF (163/442 Pages) Infineon Technologies AG – 16-Bit Single-Chip Microcontroller with C166SV2 Core Volume 2 (of 2): Peripheral Units

XC167-16 Derivatives
Peripheral Units (Vol. 2 of 2)
Capture/Compare Unit 6 (CAPCOM6)
Compare Mode Registers
In compare mode, registers CC6xR (x = 0, 1, 2) are the actual compare registers for T12.
The values stored in CC6xR are compared (all three channels in parallel) to the count
value of T12. Registers CC6xR can only be read by SW, the modification of the value is
done by a shadow register transfer from the corresponding shadow registers CC6xSR.
These registers can be read and written by SW.
In capture mode, the current value of the T12 counter register is captured into registers
CC6xR or CC6xSR when the corresponding capture event is detected (depending on the
selected mode).
CCU6_CC60R
Channel 0 Capt./Comp. Reg.
XSFR (E898_H/--)
Reset Value: 0000_H
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC60V
rh
CCU6_CC61R
Channel 1 Capt./Comp. Reg.
XSFR (E89A_H/--)
Reset Value: 0000_H
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC61V
rh
CCU6_CC62R
Channel 2 Capt./Comp. Reg.
XSFR (E89C_H/--)
Reset Value: 0000_H
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC62V
rh
Field
CC6xV
(x = 0, 1, 2)
Bits
[15:0]
Type
rh
Description
Channel x Compare Value
In compare mode, the bitfields CC6xV contain the
values that are compared to the T12 count value. In
capture mode, the captured value of T12 can be read
from these registers.
User’s Manual
CAPCOM6_X, V2.0
18-18
V2.0, 2004-04