STAC9752 Datasheet, PDF (10/95 Pages) Integrated Device Technology – TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH HEADPHONE DRIVE, SPDIF OUTPUT MICROPHONE & JACK SENSING

STAC9752/9753
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH HEADPHONE DRIVE, SPDIF OUTPUT MICROPHONE & JACK SENSING
2. CHARACTERISTICS AND SPECIFICATIONS
2.1. Electrical Specifications
2.1.1. Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the STAC9752/9753. These ratings, which are standard
values for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these or any other
conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods can affect product reliability. Electrical parameters are guaranteed only over the
recommended operating temperature range.
Item
Analog maximum supply voltage
Digital maximum supply voltage
VREFOUT output current
Voltage on any pin relative to ground
Operating temperature
Storage temperature
Soldering temperature
Pin
Maximum Rating
AVdd 6 Volts
DVdd 5.5 Volts
5 mA
Vss - 0.3 V to Vdd + 0.3 V
0^oC to +70^oC
-55 ^oC to +125 ^oC
260 ^oC for 10 seconds *
Soldering temperature information for all available packages
begins on page 90.
2.1.2. Recommended Operation Conditions
Parameter
Min.
Power Supply Voltage
Digital - 3.3 V
3.135
Analog - 5 V
4.75
Analog - 3.3 V
3.135
Ambient Operating Temperature
0
Case Temperature
T_case (48-LQFP)
Typ.
3.3
5
3.3
Max.
3.465
5.25
3.465
+70
+90
Units
V
V
V
°C
°C
ESD: The STAC9752/9753 is an ESD (electrostatic discharge) sensitive device. The human body and test
equipment can accumulate and discharge electrostatic charges up to 4000 Volts without detection. Even though
the STAC9752/9753 implements internal ESD protection circuitry, proper ESD precautions should be followed to
avoid damaging the functionality or performance.
IDT™
10
STAC9752/9753
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH HEADPHONE DRIVE, SPDIF OUTPUT MICROPHONE & JACK SENSING
REV 3.3 1206