IC-LNB_13 Datasheet, PDF (8/35 Pages) IC-Haus GmbH – 18-BIT OPTO ENCODER WITH SPI AND SER/PAR INTERFACES

iC-LNB 18-BIT OPTO ENCODER ^preliminary
WITH SPI AND SER/PAR INTERFACES
Rev A1, Page 8/35
ABSOLUTE MAXIMUM RATINGS
These ratings do not imply permissible operating conditions; functional operation is not guaranteed.
Exceeding these ratings may damage the device.
Item Symbol Parameter
No.
Conditions
G001 VDDA
Voltage at VDDA
G002 VDD
Voltage at VDD
G003 V(GND) Voltage at GND
G004 V()
Voltage at LED, PCOS, NCOS, PSIN,
NSIN, TPC, TNC, TPS, TNS
G005 V()
Voltage at INCA, INCB, INCZ, ERR,
DIR, CLK, DOUT, DIN, NSL, NCS,
MOSI, MISO, SCK, POK, XJD, GA, GB
G006 I(VDDA) Current in VDDA
G007 I(VDD) Current in VDD
G008 I(GND) Current in GND
G009 I(LED) Current in LED
G010 I()
Current in INCA, INCB, INCZ, ERR,
DIR, CLK, DOUT, DIN, NSL, NCS,
MOSI, MISO, SCK, POK, XJD, GA,
GB, TPC, TNC, TPS, TNS
G011 I()
Current in PCOS, NCOS, PSIN, NSIN
G012 Vd()
ESD Susceptibility at all pins
HBM 100pF discharged through 1.5 kΩ
G013 Tj
Junction Temperature
G014 Ts
Chip Storage Temperature
Min.
-0.3
-0.3
-0.3
-0.3
Unit
Max.
6
V
VDDA+0.3 V
0.3
V
VDDA+0.3 V
-0.3 VDD+0.3 V
-100
100
mA
-50
50
mA
-20
20
mA
-100
20
mA
-35
35
mA
-35
35
mA
2
kV
-40
125
°C
-40
125
°C
THERMAL DATA
Operating conditions: VDDA = 4 V to 5.5 V, VDD = 3 V to 5.5 V, GNDA = GND
Item Symbol Parameter
No.
Conditions
T01 Ta
Operating Ambient Temperature Range packages oBGA LNB2C, oQFN38-7x5
Unit
Min. Typ. Max.
-40
110 °C
T02 Ts
T03 Tpk
T04 Tpk
Permissible Storage Temperature
Range
Soldering Peak Temperature
Soldering Peak Temperature
packages oBGA LNB2C, oQFN38-7x5
-40
package oBGA LSH2C
tpk < 20 s, convection reflow
tpk < 20 s, vapor phase soldering
TOL (time on label) 8 h;
Please refer to customer information file No. 7
for details.
package oQFN38-7x5
tpk < 20 s, convection reflow
tpk < 20 s, vapor phase soldering
MSL 5A (max. floor life 24 h at 30 °C and
60% RH);
Please refer to customer information file No. 7
for details.
110 °C
245 °C
230 °C
245 °C
230 °C
All voltages are referenced to ground (GNDA) unless otherwise stated.
All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.