IC-MN Datasheet, PDF (13/59 Pages) IC-Haus GmbH – 25-BIT NONIUS ENCODER WITH 3-CH. SAMPLING 13-BIT Sin/D INTERPOLATION

iC-MN 25-BIT NONIUS ENCODER
WITH 3-CH. SAMPLING 13-BIT Sin/D INTERPOLATION
Rev D1, Page 13/59
ELECTRICAL CHARACTERISTICS
Operating conditions: VDD = VACO = 5 V ±10 %, Tj = -40...125 °C,
IBP calibrated to 200 µA, reference point GNDA (GND for digital I/O pins), unless otherwise stated
Item Symbol Parameter
No.
Conditions
Unit
Min. Typ. Max.
I/O Interface: Clock Line Output MAO
G01 Vs()hi
Saturation Voltage hi
Vs()hi = VDD − V(), I() = -4 mA
450 mV
G02 Vs()lo
Saturation Voltage lo
I() = 4 mA
450 mV
G03 Isc()hi
Short-circuit Current hi
-85
-30 mA
G04 Isc()lo
Short-circuit Current lo
20
65
mA
Test Signal Inputs: T2, T3
H01 Vt()hi
Input Threshold Voltage hi
2
V
H02 Vt()lo
Input Threshold Voltage lo
800
mV
H03 Vt()hys Input Hysteresis
150 250
mV
H04 Ipd()
Input-Pull-Down-Current at T2 V() = 1 V...VDD
4
30
75
µA
H05 Vpd()
Input-Pull-Down-Voltage at T2 I() = 5 µA
650 mV
H06 Ipu()
Input Pull-up Current at T3
V() = 0...VDD − 1 V
-65 30
-5
µA
H07 Vpu()
Input Pull-up Voltage at T3
Vpu() = VDD − V(), I() = -5 µA
650 mV
Test Signal Outputs: T0, T1
I01 Vs()hi
Saturation Voltage hi
Vs()hi = VDD − V(), I() = -4 mA
500 mV
I02 Vs()lo
Saturation Voltage lo
I() = 4 mA
600 mV
I03 Isc()hi
Short-circuit Current hi
-60
-15 mA
I04 Isc()lo
Short-circuit Current lo
15
60
mA
I05 Voffs()
Analog Buffer Offset Voltage at Vos() = V(T1) − V(T0), operating mode TBOS -25
T0
25
mV
I/O Interface: Input SLI
J01 Vt()hi
Input Threshold Voltage hi
2
V
J02 Vt()lo
Input Threshold Voltage lo
0.8
V
J03 Vt()hys Input Hysteresis
150 250
mV
J04 Ipd()
Input Pull-down Current
V() = 1 V...VDD
4
30
75
µA
J05 Vpd()
Input Pull-Down Voltage
I() = 5 µA
650 mV
Digital Inputs: DIR, PRES
K01 Vt()hi
Input Threshold Voltage hi
2
V
K02 Vt()lo
Input Threshold Voltage lo
0.8
V
K03 Vt()hys Input Hysteresis
150 250
mV
K04 Ipd()
Input Pull-down Current
V() = 1 V ... VDD
20.5 120 296 µA
K05 Vs()hi
Saturation Voltage hi
Vs()hi = VDD - V(); I() = 1.6 mA
295 mV
K06 Vs()lo
Saturation Voltage lo
during test function, I() = 1.6 mA
275 mV
K07 Vpd()
Input Pull-down Voltage
during test function, I() = 5 µA
600 mV