US10D10A00 Datasheet, PDF (67/94 Pages) Honeywell Solid State Electronics Center – Basic Switches

Basic Switches
Standard
AVAILABLE TERMINALS
Most of the BZ/BA catalog listings have
A2 type terminals. Several other terminal
styles are shown and others are available.
Specific information should be requested
from the 800 number or local Authorized
Distributor.
BZ/BA Series
Solder (No suffix)
Use up to #14 wire
A2
Bottom facing 6-32 NC × .218⍯
screw with cup washers
A4
(Same as A2 except #8 screws)
T
Bottom facing 6-32 NC × .218⍯ screw
with Sems lockwashers
D5
.250⍯ (6,35 mm) wide × .030⍯ (7,62) thick
quick-connect
D6
.250⍯ (6,35 mm) wide × .032⍯ (0,81 mm) thick
quick-connect
ACTUATORS
BA, BE, BM and BZ standard basic
switches use the actuators described.
P4
Side facing 8-32 × .218⍯ screw with cup washers
PC2
Self lifting pressure plate terminals and plastic
barriers for added dielectric protection
Pin plunger; in-line motion
Overtravel plunger; in-line
applications requiring additional
overtravel
Added overtravel in a panel mount
roller plunger; Actuation by cams
Leaf; Low-force, slow moving cams or
slides
Roller lever; Very low force, fast
moving cams
Roller leaf; Low-force, large
movement actuation
Lever; Very low force, slow cams and
slides
Added overtravel in a panel-mount
plunger; Heavy-duty in-line
applications or slow cams.
Cam rise should not exceed 30°
48 Honeywell Sensing and Control
For application help: call 1-800-537-6945.