US10D10A00 Datasheet, PDF (37/94 Pages) Honeywell Solid State Electronics Center – Basic Switches

Position Sensors
Hermetically Sealed Switches
HS Series
GENERAL INFORMATION
HS switches are designed for applications
where maximum electrical rating and max-
imum sealing are essential, and where size
and weight requirements are less critical.
These switches are side mounted through
mounting holes that are outside the sealed
switching chamber.
FEATURES
ɀ Hermetically sealed per MIL-S-8805,
design symbol 5 (–67° to +180°F or
–55° to 82°C)
ɀ Power load switching capability up to
25 amperes, 28 VDC
ɀ Temperature tolerance from –67°F to
+250°F (–55°C to +125°C)
ɀ High temperature construction for use
to +300°F (149°C)
ɀ Several styles of integral lever
actuators
ɀ Two styles of terminals
ɀ Military standard construction with list-
ings on the MIL-S-8805 qualified prod-
ucts list
ɀ UL recognized File #E12252; CSA cer-
tified LR 4442
ELECTRICAL RATINGS
Circuitry
Electrical Rating Codes
Single-Pole
Double-Throw
M 25 amps res., 8 amps ind., 5 amps motor, 3 amps
lamp load, 28 vdc;
1 amp res., 1 amp ind., 115 vac, 60 Hz
UL-CSA Rating: 1 amp., 115 vac, 60 Hz.
N 15 amps res., 8 amps ind., 28 vdc;
1 amp res., 1 amp ind., 115 vac, 60 Hz
O 20 amps res., 8 amps ind., 28 vdc;
1 amp res., 1 amp ind., 115 vac, 60 Hz
UL-CSA Rating: 1 amp, 115 vac, 60 Hz
P 10 amps res., 5 amps ind., 28 vdc;
1 amp res., 1 amp ind., 115 vac, 60 Hz
UL-CSA Rating: 1 amp., 115 vac, 60 Hz.
22 Honeywell Sensing and Control ɀ 1-800-537-6945 USA ɀ ⍣1-815-235-6847 International ɀ 1-416-293-8111 Canada