GX4002 Datasheet, PDF (8/74 Pages) Gennum Corporation – Dynamic on-chip power management control

2. Electrical Characteristics
2.1 Absolute Maximum Ratings
Parameter
Value
Supply Voltage
-0.5 to +3.8V_DC
Input ESD Voltage
2kV
Storage Temperature Range
-50°C < T_A < 125°C
Input Voltage Range (any input pin)
-0.3 to 3.8V_DC*
Solder Reflow Temperature
260°C
*NOTE: Stress above those listed under Absolute Maximum Ratings may cause permanent
damage to the device. This is a stress rating only, and functional operation of the device at
these or any other conditions above those listed in the operational sections of this
specification is not applied. Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
2.2 DC Electrical Characteristics
Table 2-1: DC Electrical Characteristics
V_CC = +2.8V to +3.47V, T_C = -40°C to 100°C. Typical values are V_CC = +3.3V and T_A = 25°C, unless otherwise specified.
Specifications assume default setting to end-terminated 50Ω transmission lines, unless otherwise stated. Typical Data Rate = 14.025Gb/s
Note: mApp refers to mA peak-to-peak value.
Parameter
Conditions
Supply Voltage
Power
Control Logic Input Specifications
Input Low Voltage
Input High Voltage
Input Low Current
Input High Current
V_IL = 0V
V_IH = 3.3V,
V_CC = 3.3V
Status Indicator Output Specifications
Symbol
Min
Typ
Max
Units Notes
V_CC
2.8
3.3
3.47
V
—
—
600
800
mW
1, 2
V_IL
0
—
0.4
V
—
V_IH
2.0
—
V_CC
V
—
I_IL
—
-100
—
μA
—
I_IH
—
100
—
μA
—
Indicator Output Logic
LOW
I_SINK(max) = 3mA
V_OL
—
0.2
0.4
V
—
GX4002 2x2 14.025Gb/s Crosspoint Switch with Trace
Equalization and Output De-Emphasis
Data Sheet
55972 - 0
March 2012
8 of 74
Proprietary & Confidential