MB15F73UL Datasheet, PDF (7/18 Pages) Fujitsu Component Limited. – ASSP Dual Serial Input PLL Frequency Synthesizer

Dec. 2000
Edition 2.0
MB15F73UL
Parameter
"H"level Output current
"L" level Output current
Charge pump
current rate
DoTX^*8
DoRX
IDOL/IDOH
vs VDO
vs Ta
(Continued)
Ta =(VCC = 2.4 to 3.6 V, Ta = –40 to +85°C)
Symbol
Condition
Value
Unit
Min. Typ. Max.
VCC=Vp
CS bit ="1" -8.2 -6.0 -4.1
IDOH^*4
=2.7 V
VDOH=Vp /2
Ta= 25°C
CS bit ="0"
-2.2
-1.5
-0.8
mA
VCC=Vp
CS bit ="1" 4.1
6.0
8.2
IDOL
=2.7 V
VDOL=Vp /2
Ta= 25°C
CS bit ="0"
0.8
1.5
2.2
IDOMT^*5 VDO=Vp/2
–
3
–
%
IDOVD^*6 0.5V < VDO < Vp-0.5V
–
10
–
%
IDOTA^*7
-40°C < Ta < 85 °C,
VDO=Vp/2
–
5
–
%
*1: Conditions; fosc=12.8MHz, Ta = 25°C, SW="L" in locking state.
*2: VccIF=VpIF=VccRF=VpRF=2.7V, fosc=12.8MHz, Ta = 25°C, in power saving mode.
*3: AC coupling. 1000pF capacitor is connected under the condition of min. operating frequency.
*4: The symbol "-"(minus) means direction of current flow.
*5: Vcc=Vp=2.7V, Ta=25°C ( ||I3| - |I4|| ) / [( |I3| + |I4| )/2] x 100(%)
*6: Vcc=Vp=2.7V, Ta=25°C [( ||I2| - |I1|| ) /2 ] / [( |I1| + |I2| )/2] x 100(%) (Applied to each IDOL, IDOH)
*7: Vcc=Vp=2.7V, [(||IDO(85C)| - |IDO(-40C)||) /2] / [(|IDO(85C)| + |IDO(-40C)|) /2] x 100(%) (Applied to each IDOL, IDOH)
*8: When Charge pump current is measured, set LDS="0", T1="0" and T2="1".
*9: PSIF=PSRF=GND (VIL=GND and VIH=Vcc for Clock, Data, LE)
I2
I3
I1
I4
I2
0.5
VP/2
Output voltage(V)
I1
VP-0.5
VP
7