MB15F73UL Datasheet, PDF (5/18 Pages) Fujitsu Component Limited. – ASSP Dual Serial Input PLL Frequency Synthesizer

Dec. 2000
Edition 2.0
MB15F73UL
n ABSOLUTE MAXIMUM RATINGS
Parameter
Power supply voltage
Input voltage
Output voltage
Storage temperature
Symbol
VCC
Vp
VI
VO
VDO
Tstg
Rating
–0.5 to +4.0
Vcc to +4.0
–0.5 to VCC +0.5
GND to Vcc
GND to Vp
–55 to +125
Unit
Remark
V
V
V
V
LD/fout
V
Do
°C
Note: Permanent device damage may occur if the above Absolute Maximum Ratings are exceeded. Functional
operation should be restricted to the conditions as detailed in the operational sections of this data sheet.
Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
n RECOMMENDED OPERATING CONDITIONS
Parameter
Power supply voltage
Input voltage
Operating temperature
Symbol
VCC
Vp
VI
Ta
Min.
2.4
Vcc
GND
–40
Value
Typ.
2.7
2.7
–
–
Max.
3.6
3.6
VCC
+85
Unit
V
V
V
°C
Remark
VCCRF = VCCIF
Handling Precautions
(1) VccRF,VpRF,VccIF and VpIF must supply equal voltage.
Even if either RF-PLL or IF-PLL is not used, power must be supplied to both VccRF,VpRF,VccIF and VpIF to keep them
equal. It is recommended that the non-use PLL is controlled by power saving function.
(2) To protect against damage by electrostatic discharge, note the following handling precautions:
-Store and transport devices in conductive containers.
-Use properly grounded workstations, tools, and equipment.
-Turn off power before inserting or removing this device into or from a socket.
-Protect leads with conductive sheet, when transporting a board mounted device.
5