MB39C313 Datasheet, PDF (43/52 Pages) Fujitsu Component Limited. – 4ch System Power Management IC for LCD Panel

MB39C313
■ USAGE PRECAUTIONS
1. Never use setting exceeding maximum rated conditions.
Semiconductor devices can be permanently damaged by application of stress (voltage, current, temperature,
etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
2. Use the devices within recommended conditions
It is recommended that devices be operated within recommended conditions.
Exceeding the recommended operating condition may adversely affect devices reliability.
Nominal electrical characteristics are warranted within the range of recommended operating conditions
otherwise specified on each parameter in the section of electrical characteristics.
3. Design the ground line on printed circuit boards with consideration of common imped-
ance.
4. Take appropriate static electricity measures.
Containers for semiconductor materials should have anti-static protection or be made of conductive material.
After mounting, printed circuit boards should be stored and shipped in conductive bags or containers.
Work platforms, tools, and instruments should be properly grounded.
Working personnel should be grounded with resistance of 250 kΩ to 1 MΩ between body and ground.
5. Do not apply negative voltages
The use of negative voltages below -0.3 V may activate parasitic transistors on the device, which can cause
abnormal operation.
■ ORDERING INFORMATION
Part number
MB39C313PFTH
Package
28-pin plastic TSSOP
FPT-28P-M20
■ EV BOARD ORDERING INFORMATION
EV Board Part No.
MB39C313EVB-01
EV Board version No.
MB39C313EVB-01 Rev.1.2
Remarks
Exposed PAD
Remarks
TSSOP-28
■ RoHS COMPLIANCE INFORMATION OF LEAD (Pb) FREE VERSION
The LSI products of FUJITSU MICROELECTRONICS with “E1” are compliant with RoHS Directive, and has
observed the standard of lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls (PBB),
and polybrominated diphenylethers (PBDE).
A product whose part number has trailing characters “E1” is RoHS compliant.
DS04–27267–1E
43