MB82DBS08164D-70L Datasheet, PDF (17/60 Pages) Fujitsu Component Limited. – 128 M Bit (8 M word x 16 bit) Mobile Phone Application Specific Memory

MB82DBS08164D-70L
■ ABSOLUTE MAXIMUM RATINGS
Parameter
Rating
Symbol
Unit
Min
Max
Voltage of VDD Supply Relative to VSS *
VDD
− 0.5
+ 2.3
V
Voltage at Any Pin Relative to VSS *
VIN, VOUT
− 0.5
+ 2.3
V
Short Circuit Output Current
IOUT
− 50
+ 50
mA
Storage Temperature
TSTG
− 55
+ 125
°C
* : All voltages are referenced to VSS = 0 V.
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
■ RECOMMENDED OPERATING CONDITIONS
Parameter
Value
Symbol
Unit
Min
Max
Power Supply Voltage*¹
VDD
1.7
1.95
V
Ground
VSS
0
0
V
High Level Input Voltage*^1, *²
VIH
VDD × 0.8
VDD + 0.2
V
Low Level Input Voltage*^1, *³
VIL
− 0.3
VDD × 0.2
V
Ambient Temperature
TA
0
+ 70
°C
*1 : All voltages are referenced to VSS = 0 V.
*2 : Maximum DC voltage on input and I/O pins is VDD + 0.2 V. During voltage transitions, inputs may overshoot to
VDD + 1.0 V for the periods of up to 5 ns.
*3 : Minimum DC voltage on input and I/O pins is -0.3 V. During voltage transitions, inputs may undershoot VSS to
-1.0 V for the periods of up to 5 ns.
WARNING: The recommended operating conditions are required in order to ensure the normal operation of
the semiconductor device. All of the device's electrical characteristics are warranted when the
device is operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges.
Operation outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented
on the data sheet. Users considering application outside the listed conditions are advised to contact
their representatives beforehand.
■ PIN CAPACITANCE
Parameter
Address Input Capacitance
Control Input Capacitance
Data Input/Output Capacitance
Symbol
Test
conditions
Min
CIN1
VIN = 0 V
⎯
CIN2
VIN = 0 V
⎯
CIO
VIO = 0 V
⎯
(f = 1 MHz, TA = +25 °C)
Value
Typ
Unit
Max
⎯
5
pF
⎯
5
pF
⎯
8
pF
DS05-11454-1E
17