MC9S12DT128CPVE Datasheet, PDF (95/128 Pages) Freescale Semiconductor, Inc – Device User Guide

Freescale Semicond_Mu_C9c_St₁o_2Dr_T,₁I₂n_8Bc_D._{evice User Guide — V01.09}
A.1.10 Supply Currents
This section describes the current consumption characteristics of the device as well as the conditions for
the measurements.
A.1.10.1 Measurement Conditions
All measurements are without output loads. Unless otherwise noted the currents are measured in single
chip mode, internal voltage regulator enabled and at 25MHz bus frequency using a 4MHz oscillator in
Colpitts mode. Production testing is performed using a square wave signal at the EXTAL input.
A.1.10.2 Additional Remarks
In expanded modes the currents flowing in the system are highly dependent on the load at the address, data
and control signals as well as on the duty cycle of those signals. No generally applicable numbers can be
For More Information On This Product,
Go to: www.freescale.com