MC9S12DG128MPVE Datasheet, PDF (94/128 Pages) Freescale Semiconductor, Inc – Device User Guide

MC9S12DT128B Device User G^Fu^rid^ee^e—^sV^c0^a1.^l0^e9 ^{Semiconductor, Inc.}
Table A-6 5V I/O Characteristics
Conditions are shown in Table A-4 unless otherwise noted
Num C
Rating
Symbol Min
Typ
Max
Unit
1 P Input High Voltage
T Input High Voltage
2 P Input Low Voltage
T Input Low Voltage
3 C Input Hysteresis
V_IH
0.65*V_DD5
–
V
V_IH
–
–
V_DD5 + 0.3
V_IL
–
–
0.35*V_DD5
V
V_IL
V_SS5 – 0.3
–
–
V
V_HYS
250
mV
Input Leakage Current (pins in high ohmic input
mode)¹
4 P V_in = V_DD5 or V_SS5
ADC Inputs AN15:0
All other Ports (A, B, E, K, M, S, T)
I_in
–
-1.0
–2.5
µA
1.0
2.5
Output High Voltage (pins in output mode)
5 C ^{Partial Drive IOH = –2.0mA}
P _{Full Drive IOH = –10.0mA}
V_OH
V_DD5 – 0.8
–
–
V
Output Low Voltage (pins in output mode)
6 C ^{Partial Drive IOL = +2.0mA}
P _{Full Drive IOL = +10.0mA}
V_OL
–
–
0.8
V
Internal Pull Up Device Current,
7 P _{tested at VIL Max.}
Internal Pull Up Device Current,
8 C _{tested at VIH Min.}
Internal Pull Down Device Current,
9 P _{tested at VIH Min.}
Internal Pull Down Device Current,
10 C _{tested at VIL Max.}
11 D Input Capacitance
I_PUL
–
–
–130
µA
I_PUH
–10
–
–
µA
I_PDH
–
–
130
µA
I_PDL
10
–
C_in
6
–
µA
–
pF
Injection current²
12 T _{Single Pin limit}
Total Device Limit. Sum of all injected currents
I_ICS
–2.5
–
I_ICP
–25
13 P _{Port H, J, P Interrupt Input Pulse filtered} ³
t_PULSE
2.5
mA
25
3
µs
14 P _{Port H, J, P Interrupt Input Pulse passed} ³
t_PULSE
10
µs
NOTES:
1. Maximum leakage current occurs at maximum operating temperature. Current decreases by approximately one-half for
each 8 C to 12 C in the temperature range from 50 C to 125 C.
2. Refer to Section A.1.4 Current Injection, for more details
3. Parameter only applies in STOP or Pseudo STOP mode.
For More Information On This Product,
Go to: www.freescale.com