MC9S12DG128MPVE Datasheet, PDF (71/128 Pages) Freescale Semiconductor, Inc – Device User Guide

Freescale Semicond_Mu_C9c_St₁o_2Dr_T,₁I₂n_8Bc_D._{evice User Guide — V01.09}
Section 4 Modes of Operation
4.1 Overview
Eight possible modes determine the operating configuration of the MC9S12DT128B. Each mode has an
associated default memory map and external bus configuration controlled by a further pin.
Three low power modes exist for the device.
4.2 Chip Configuration Summary
The operating mode out of reset is determined by the states of the MODC, MODB, and MODA pins during
reset (Table 4-1). The MODC, MODB, and MODA bits in the MODE register show the current operating
mode and provide limited mode switching during operation. The states of the MODC, MODB, and MODA
pins are latched into these bits on the rising edge of the reset signal. The ROMCTL signal allows the setting
of the ROMON bit in the MISC register thus controlling whether the internal Flash is visible in the
memory map. ROMON = 1 mean the Flash is visible in the memory map. The state of the ROMCTL pin
is latched into the ROMON bit in the MISC register on the rising edge of the reset signal.
BKGD = PE6 =
MODC MODB
0
0
0
0
0
1
0
1
1
0
1
0
1
1
1
1
PE5 =
MODA
0
1
0
1
0
1
0
1
Table 4-1 Mode Selection
PK7 =
ROMCTL
X
X
X
X
X
0
1
X
0
1
ROMON
Bit
1
0
0
0
1
0
1
1
0
1
Mode Description
Special Single Chip, BDM allowed and ACTIVE. BDM is
allowed in all other modes but a serial command is
required to make BDM active.
Emulation Expanded Narrow, BDM allowed
Special Test (Expanded Wide), BDM allowed
Emulation Expanded Wide, BDM allowed
Normal Single Chip, BDM allowed
Normal Expanded Narrow, BDM allowed
Special Peripheral; BDM allowed but bus operations
would cause bus conflicts (must not be used)
Normal Expanded Wide, BDM allowed
For further explanation on the modes refer to the Core User Guide.
Table 4-2 Clock Selection Based on PE7
PE7 = XCLKS
Description
1
Colpitts Oscillator selected
0
Pierce Oscillator/external clock selected
For More Information On This Product,
Go to: www.freescale.com