MC9S12D64 Datasheet, PDF (94/128 Pages) Freescale Semiconductor, Inc – Device User Guide V01.20

MC9S12DJ64 Device User Guide — V01.20
Table A-6 5V I/O Characteristics
Conditions are shown in Table A-4 unless otherwise noted
Num C
Rating
1 P Input High Voltage
2 P Input Low Voltage
3 C Input Hysteresis
Input Leakage Current (pins in high impedance input
4 P ^mode)
V_in = V_DD5 or V_SS5
Output High Voltage (pins in output mode)
5 P ^{Partial Drive IOH = –2mA}
Full Drive IOH = –10mA
Output Low Voltage (pins in output mode)
6 P ^{Partial Drive IOL = +2mA}
Full Drive IOL = +10mA
Internal Pull Up Device Current,
7 P _{tested at VIL Max.}
Internal Pull Up Device Current,
8 C _{tested at VIH Min.}
Internal Pull Down Device Current,
9 P _{tested at VIH Min.}
Internal Pull Down Device Current,
10 C _{tested at V Max.}
IL
11 D Input Capacitance
Injection current¹
12 T _{Single Pin limit}
Total Device Limit. Sum of all injected currents
13 P _{Port H, J, P Interrupt Input Pulse filtered}²
14 P _{Port H, J, P Interrupt Input Pulse passed}²
NOTES:
1. Refer to Section A.1.4 Current Injection, for more details
2. Parameter only applies in STOP or Pseudo STOP mode.
Symbol
V_IH
V_IL
V_HYS
I_in
V_OH
V_OL
I_PUL
I_PUH
I_PDH
I_PDL
C_in
I_ICS
I_ICP
t_pign
t_pval
Min
0.65*V_DD5
V_SS5 - 0.3
–1
V_DD5 – 0.8
-
-
-10
-
10
-2.5
-25
10
Typ
-
-
250
-
-
-
-
-
-
-
6
-
Max Unit
V_DD5 + 0.3
V
0.35*V_DD5
V
mV
1
µA
-
V
0.8
V
–130
µA
-
µA
130
µA
-
µA
-
pF
2.5
mA
25
3
µs
µs
A.1.10 Supply Currents
This section describes the current consumption characteristics of the device as well as the conditions for
the measurements.
94