MC9S08JM60_09 Datasheet, PDF (43/388 Pages) Freescale Semiconductor, Inc – HCS08 Microcontrollers

Table 4-1. Reset and Interrupt Vectors (continued)
Address
(High/Low)
0xFFCA:FFCB
0xFFCC:FFCD
0xFFCE:FFCF
0xFFD0:FFD1
0xFFD2:FFD3
0xFFD4:FFD5
0xFFD6:FFD7
0xFFD8:FFD9
0xFFDA:FFDB
0xFFDC:FFDD
0xFFDE:FFDF
0xFFE0:FFE1
0xFFE2:FFE3
0xFFE4:FFE5
0xFFE6:FFE7
0xFFE8:FFE9
0xFFEA:FFEB
0xFFEC:FFED
0xFFEE:FFEF
0xFFF0:FFF1
0xFFF2:FFF3
0xFFF4:FFF5
0xFFF6:FFF7
0xFFF8:FFF9
0xFFFA:FFFB
0xFFFC:FFFD
0xFFFE:FFFF
Vector
ADC Conversion
KBI
SCI2 Transmit
SCI2 Receive
SCI2 Error
SCI1 Transmit
SCI1 Receive
SCI1 Error
TPM2 Overflow
TPM2 Channel 1
TPM2 Channel 0
TPM1 Overflow
TPM1 Channel 5
TPM1 Channel 4
TPM1 Channel 3
TPM1 Channel 2
TPM1 Channel 1
TPM1 Channel 0
Reserved
USB Status
SPI2
SPI1
MCG Loss of Lock
Low Voltage Detect
IRQ
SWI
Reset
Vector Name
Vadc
Vkeyboard
Vsci2tx
Vsci2rx
Vsci2err
Vsci1tx
Vsci1rx
Vsci1err
Vtpm2ovf
Vtpm2ch1
Vtpm2ch0
Vtpm1ovf
Vtpm1ch5
Vtpm1ch4
Vtpm1ch3
Vtpm1ch2
Vtpm1ch1
Vtpm1ch0
—
Vusb
Vspi2
Vspi1
Vlol
Vlvd
Virq
Vswi
Vreset
Chapter 4 Memory
4.2 Register Addresses and Bit Assignments
The registers in the MC9S08JM60 series are divided into these three groups:
• Direct-page registers are located in the first 176 locations in the memory map, so they are
accessible with efficient direct addressing mode instructions.
• High-page registers are used much less often, so they are located above 0x1800 in the memory
map. This leaves more room in the direct page for more frequently used registers and variables.
• The nonvolatile register area consists of a block of 16 locations in flash memory at
0xFFB0–0xFFBF.
Nonvolatile register locations include:
— Three values which are loaded into working registers at reset
MC9S08JM60 Series Data Sheet, Rev. 3
Freescale Semiconductor
43