MC9S08JM60_09 Datasheet, PDF (367/388 Pages) Freescale Semiconductor, Inc – HCS08 Microcontrollers

Appendix A Electrical Characteristics
1 _{Refer to Figure A-10 through Figure A-13.}
2 _{All timing is shown with respect to 20% VDD and 70% VDD, unless noted; 100 pF load on all SPI pins. All}
timing assumes slew rate control disabled and high drive strength enabled for SPI output pins.
3 _{Time to data active from high-impedance state.}
4 _{Hold time to high-impedance state.}
SS¹
(OUTPUT)
SCK
(CPOL = 0)
(OUTPUT)
SCK
(CPOL = 1)
(OUTPUT)
MISO
(INPUT)
MOSI
(OUTPUT)
2
1
5
4
5
6
7
MSB IN²
10
MSB OUT²
4
BIT 6 . . . 1
10
BIT 6 . . . 1
3
LSB IN
11
LSB OUT
NOTES:
1. SS output mode (MODFEN = 1, SSOE = 1).
2. LSBF = 0. For LSBF = 1, bit order is LSB, bit 1, ..., bit 6, MSB.
Figure A-10. SPI Master Timing (CPHA = 0)
MC9S08JM60 Series Data Sheet, Rev. 3
Freescale Semiconductor
367