908E621_08 Datasheet, PDF (35/65 Pages) Freescale Semiconductor, Inc – Integrated Quad Half-bridge and Triple High Side with Embedded MCU and LIN for High End Mirror

FUNCTIONAL DEVICE OPERATION
OPERATIONAL MODES
Temperature Sensor
The analog die includes an on chip temperature sensor.
This sensor offers a voltage which is proportional to the
actual mean chip junction temperature.
VSUP Prescaler
The VSUP prescaler offers a possibility to measure the
external supply voltage. The output of this voltage is VSUP /
RATIOVSUP.
A0 and Multiplexer Control Register (A0MUCTL)
Register Name and Address: A0MUCTL - $08
Bit7
6
5
4
3
2
1
Bit0
Read
CSON
CSSEL
1
CSSEL
0
CSA
SS3
SS2
SS1
SS0
Write
Reset 0
0
0
0
0
0
0
0
CSON — Current Source on/off
This read/write bit enables the current source for the A0 or
A0CST inputs. Reset clears CSON bit.
1 = Current Source enabled
0 = Current Source disabled
CSSEL[1:0] — Current Source Select Bits
These read/write bits select the current source values for
A0 or A0CST input. Reset clears CSSEL[1:0] bits.
Table 7. A0 Current Source Level Selection Bits
CSSEL1 CSSEL0
Current Source Enable (typ.)
0
0
40µA
0
1
120µA
1
0
320µA
1
1
800µA
CSA — H-bridges Current Sense Amplification Select Bit
This read/write bit selects the current sense amplification
of the H-Bridges HB1:HB4 current recopy. Reset clears the
CSA bit.
1 = low current sense amplification
0 = high current sense amplification
SS[3:0] — Analog Source Input Select Bits
These read/write bits selects the analog input source for
the ADOUT pin. Reset clears the SS[3:0] bits Analog
Multiplexer Configuration Bits.
SS3 SS2 SS1 SS0
0
0
0
0
0
0
0
1
0
0
1
0
0
0
1
1
0
1
0
0
0
1
0
1
0
1
1
0
0
1
1
1
1
0
0
0
1
0
0
1
1
0
1
0
1
0
1
1
1
1
0
0
1
1
0
1
1
1
1
0
1
1
1
1
Channel
current recopy HB1
current recopy HB2
current recopy HB3
current recopy HB4
current recopy HS1
current recopy HS2
current recopy HS3
not used
Chip temperature
VSUP prescaler
Pin A0
Pin A0CST
not used
not used
not used
not used
Hall-effect Sensor Input Pin H0
The H0 pin can be configured as general purpose input
(H0MS = 0) or as hall-effect sensor input (H0MS = 1) to be
able to read 3pin / 2pin hall sensors or switches.
Analog Integrated Circuit Device Data
Freescale Semiconductor
908E621
35