F75111 Datasheet, PDF (32/45 Pages) Feature Integration Technology Inc. – Low Power GPIO Datasheet

F75111
25ms else if set to 0 de-bounce time is 7u(default).
6
DB_TIME26_SEL R/W VSB3V Select GPIO26 input de-bounce time. If set to 1 de-bounce time is
25ms else if set to 0 de-bounce time is 7u(default).
5
DB_TIME25_SEL R/W VSB3V Select GPIO25 input de-bounce time. If set to 1 de-bounce time is
25ms else if set to 0 de-bounce time is 7u(default).
4
DB_TIME24_SEL R/W VSB3V Select GPIO24 input de-bounce time. If set to 1 de-bounce time is
25ms else if set to 0 de-bounce time is 7u(default).
3
DB_TIME23_SEL R/W VSB3V Select GPIO23 input de-bounce time. If set to 1 de-bounce time is
25ms else if set to 0 de-bounce time is 7u(default).
2
DB_TIME22_SEL R/W VSB3V Select GPIO22 input de-bounce time. If set to 1 de-bounce time is
25ms else if set to 0 de-bounce time is 7u(default).
1
DB_TIME21_SEL R/W VSB3V Select GPIO21 input de-bounce time. If set to 1 de-bounce time is
25ms else if set to 0 de-bounce time is 7u(default).
0
DB_TIME20_SEL R/W VSB3V Select GPIO20 input de-bounce time. If set to 1 de-bounce time is
25ms else if set to 0 de-bounce time is 7u(default).
7.36 WDTOUT Control Register – Index 34h
Power-on default [7:0] =0000_0000b
Bit
Name
R/W PWR
7-3 Reserved
RO
2
SEL_RST_2S
R/W VSB3V
1
WDTOUT10_OIN R/W VSB3V
V
0
STS_WDTOUT1 R/W VSB3V
0
Description
When set this bit to 1, the WDTOUT10 low pulse width is 2 Sec, if set
to 0 the low pulse width is 100ms.
WDTOUT10# output level inverting. When write 1, the output pin will
be inverted. Default is low active when time is out.
Indicate WDTOUT10 is occurred. Write 1 to clear this bit. Writing 0 is
invalid.
7.37 WDTOUT10 Control Register – Index 35h
Power-on default [7:0] =0000_0000b
Bit
Name
R/W PWR
7
WDT10_ENABLE R/W VSB3V
Description
Enable WDTOUT10 Output Timer. If set to 1, the WDTOUT10 timer
will be started. When WDTOUT10# is asserted, low pulse is
occurred.
- 30 -
July, 2007
V0.27P