NS-SERIES Datasheet, PDF (43/57 Pages) Omron Electronics LLC – Programmable Terminals

NS Series
Cable
Product name
Cable *1
Specifications
Screen transfer cable for DOS/V (CX-Designer ↔ PT)
Length: 2 m
Model
XW2Z-S002
Standards
---
USB-Serial Conversion Cable
Length: 0.5 m
CS1W-CIF31
N
USB relay cable
Length: 1 m
NS-USBEXT-1M
RS-422A cable (loose wires + D-Sub 9-pin)
Length: 10 m
NSH5-422CW-10M
---
NSH5 Cables
RS-232C cable (loose wires + D-Sub 9-pin)
Length: 3 m
NSH5-232CW-3M
RS-232C cable (loose wires + D-Sub 9-pin)
Length: 10 m
NSH5-232CW-10M
UL-compliant
NSH5 Cable
RS-422A cable (loose wires)
RS-232C cable (loose wires + relay cable)
RS-232C cable (loose wires + relay cable)
Length: 10 m
NSH5-422UL-10M
Length: 3 m
NSH5-232UL-3M
CU
Length: 10 m
NSH5-232UL-10M
PT-to-PLC
Connecting Cable *2
PT connection: 9 pins
PLC connection: 9 pins
PT connection: 9 pins
PLC peripheral port
Length: 2 m
Length: 5 m
Length: 2 m
Length: 5 m
XW2Z-200T
XW2Z-500T
XW2Z-200T-2
XW2Z-500T-2
NSH5 Removable Box
Cable
RS-232C Cable (connectors)
Length: 3 m
NSH5-232CN-3M
---
Length: 10 m
NSH5-232CN-10M
NSH5 Removable Box
---
NSH5-AL001
NSH5 Wall-mounting
Bracket
---
NSH5-ATT02
NSH5 Visor
---
NSH5-ATT01
*1. Use a standard USB Type A male to Type B type male Cable to connect the NS series PT to a personal computer (CX-Designer).
Use a standard USB cable to connect the NS series PT to a PictBridge-compatible printer. USB cable type depends on the printer.
*2. To connect the NS series PT to NJ series Controller, using a commercially available 10/100-BASE-TX twisted-pair cable.
For detail, refer to the NS series SETUP MANUAL (Cat. No.V083).
9