NS-SERIES Datasheet, PDF (33/57 Pages) Omron Electronics LLC – Programmable Terminals

Recipe Handling
Checking machine data or switching processes from
a host computer is easy. Parameter groups in the PLC
can be transferred together to a computer, and the
transferred data can be checked and edited in CSV
format, e.g., using Excel. The edited data can then be
transferred together back to the PLC.
Easy Installation
To get started, just install the NS-Runtime in the
computer and place the screen data in the applicable
folder. NS/NSJ-series screens and NS-Runtime
screens can all be managed using one single tool.
Note: The NS-Runtime will operate in a computer environment even if the
CX-Designer installed is not installed. The hardware key (USB
dongle) that is supplied with the NS-Runtime is required for
operation.
Recipe data
CSV
format
NS-Runtime
Screen Data
Application Startup Function
User applications can be started from NS-Runtime.
Applications can be started simply by pressing
buttons on the screen.
To PLC
NS-Runtime
Started
User application
Screen designer: CX-Designer (CX-One)
For example, to start an
application by pressing a button…
Use the EXEC( ) macro.
Example: EXEC("C:ProgramFiles\Micros..\EXCEL.EXEC:\..\
ɹɹɹɹTEST2.xls…..);
Note: As much as possible, keep applications closed that are
not required for operation.
Note 1: If the screen data is converted for the NS Series, NS-Series PT system versions must be 8.1 or earlier. The screen data of system version 8.2 can not be converted for the NS-Runtime.
Note 2: Do not use this product for 24-hour operation in an FA environment. OMRON shall not be responsible if the computer or application does not operate properly due to noise or other causes.
OMRON shall not be responsible for any problems that may be caused by any applications other than OMRON products.
33